Septic systems are most often found in rural areas of Pe Ell WA and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in Pe Ell WA means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in Pe Ell WA?
For millions of people living in rural settings septic tank pumping is a fact of life. With the closest municipal sewage hookup miles away a properly maintained and working septic system is vitally important and getting it pumped out at regular intervals is a part of that maintenance. In this article we will look at why getting it pumped out regularly is so important, how it is done and about how much you can expect to pay for this service.
But before we get into all that let's take a quick look at what a septic system is and how it works. In simplest terms a septic system is an underground sewage treatment system for homes that do not have access to municipal sewer services. It typically is comprised of four parts; the waste pipe from the house, the septic tank, the drain field and the soil. All these parts need to in working order but the tank itself is the most important part.
Getting the tank pumped out at regular intervals keeps it working properly and prevents clogs that can cause sewage to back up into the house and create disgusting odors. The primary contributor to septic tank clogs are things that very biodegradable. This includes cooking grease and oils that get dumped down the drain and paper products other then toilet paper; paper towels, sanitary napkins and tampons, cigarette butts and cotton balls will all eventually degrade but they tend to get stuck in the inner working of the tank and create clogs that worsen over time.
Another reason to get a septic tank pumped regularly is to check it for damage that can compromise its ability to work in an efficient manner. Once it's pumped out it can be visually inspected for cracks and other damage. If any damage is detected it needs to be repaired to prevent future problems.
The pumping process itself is pretty straight forward. A large truck, sometimes referred to as a "Honey Wagon", with a big tank, suction pump, and a large hoses will come to the property and park in the general vicinity of the septic tank. The operator will remove the manhole cover from the tank, lower the suction hoses into it and fire up the pumps, sucking the accumulated waste into the holding tank on the truck.
A good pumping service will also provide a thorough inspection of the septic tank once it is pumped clean. They will inspect the tank, valves and inlet and outlet ports for damage such as cracks or clogs. They will also inspect the ground around the tank for signs of leaks as well. Any problems should be brought to the homeowner so that they can be dealt with to ensure the proper operation of the entire septic system.
The cost to get a septic tank pumped out varies and will depend on where you live along with a few other factors. Normally it will cost between $125 to $250 or more. The easier the job the less it will cost but there are some circumstances that can cause the price to increase.
The first problem many homeowners run into is knowing exactly where there septic tank is buried. This is particularly true for people who have purchased a home with an existing system. If it is buried and its location isn't readily apparent then your septic pumping service can use a plumbing snake with a radio emitter attached to the end. The snake is fed through one of the cleanouts in the house and out into the tank. A radio receiver is then used to find the end of the snake which gives the location of the tank.
Another problem is a lack of a septic riser over the lid covering the opening into the tank. If the pumping contractor has to dig down to find the lid this can add to the cost of the service. This is also the perfect opportunity to install a riser to avoid this issue for future pump outs.
The thing to remember when it comes the cost of pumping a septic tank out; The easier it is to for the pumper truck driver to find and access the tank the lower the overall cost will be. It can be well worth it to address any of these issues the first time you get your tank pumped out as it will keep costs down in the future.
Septic tank pumping is the most important part of maintaining a septic system. A clogged or overfull tank is the primary cause of many septic system problems that can be prevented through regularly scheduled visits by the "Honey Wagon".
To understand what is involved in septic tank pumping, it is first important to understand what a septic system is, what it does and how it works. A septic system is, very simply, an underground treatment system for household sewage. A typical septic system consists of 4 components: the pipe from the house, the septic tank, a drain field and the soil. Damage or malfunction of any of these components can cause the system to fail which can result in soil and drinking water contamination and costly repairs or replacements by the homeowner.
How it works
A very basic explanation of how the system works begins with waste water leaving the house through the plumbing network inside the house to the pipe leading to the septic tank. The tank is buried underground and is usually constructed in a water tight manner of concrete, fiberglass or polyethylene. It is intended to hold the waste water long enough to allow the solids to settle to the bottom (to form sludge) and the oils to float to the top (to form scum). Some of the solid waste decomposes as well. There are compartments and a "t" shaped outlet from the septic tank that prevents the sludge and scum from leaving the tank to travel to the drain fields. Once the liquid enters the drain field, it is filtered through the several layers of soil for the final treatment by removal of harmful bacteria, viruses and nutrients.
Septic tank pumping is required periodically to remove the sludge and scum from the tank. If the sludge and scum is allowed to build up in the tank, it can clog the drainage from the septic tank and the drain field. Your local septic service company in Molalla can provide periodic inspections as well as pumping and cleaning of your tank to keep everything working as it was designed.
The pumping process
The process of septic tank pumping involves the use of a large tank truck with suction pumps and hoses. The hoses are inserted into the manhole opening at the ground level to remove the scum and sludge accumulation. The sludge and scum are sucked into the tank on the truck and it is later disposed of in an approved manner and place. The septic service companies in Molalla will inspect the tank, valves and the ground around the system to assess for leaks or clogged areas. Areas needing attention will be brought to the attention of the homeowner and an appropriate resolution suggested.
Since septic tanks may get blocked with waste products over a period of time, it is always better to get them serviced on a regular basis. Septic tank pumping is necessary at times to enhance the lifespan of these systems and also to prevent solid waste from accumulating enough to reach the surface area of the tank. However, it is very important to know the exact time when your septic system needs to be pumped.
According to most experts from some of the cities in the US, like Lawrenceville and Monroe, it is better not to wait till your cesspit is full in order to clean it. Some important points to remember in order to know the exact time for septic tank pumping are:
1. Size of the tank: It is very important to know the exact size of your cesspit in order to know the ideal time to clean it. In order to know when your cesspit needs pumping, you may contact the local health department with the size of it and also the total number of people residing in your home. They would be able to tell you how often your cesspit needs cleaning.
2. Do not wait for any symptoms: According to most experts from some of the major cities in the US, like Duluth and Lawrenceville, it is best not to wait for any signs that would tell you when to opt for septic tank pumping. Normally when these systems work, the waste settles at the bottom and the residue water passes on through the drain field. Once this waste accumulates a lot, it would tend to push its way into the drain field. This would in turn prevent the smooth passage of water. It is always better to opt for septic tank pumping before this happens.
3. Check visually: Most of the cesspits have easy access for you to look inside. Check visually on a regular basis to see that the waste does not accumulate too much. It is good to remember that solid waste should not take up more than 30% of the total area.
Regular septic tank inspections done by a professional plumber can help avert a major disaster caused by a septic system failure. Unfortunately, these are more common than you would think. Because the septic system runs underground, most homeowners tend to ignore it. However, failure to carry out regular inspections of the sewer system can be a health hazard and can also result in destruction of the surrounding property.
Before buying a new home, it is crucial to find out as much as you can about the system. Find out how old the system is and whether or not is has been regularly maintained. Better still, get an inspection done so that you do not start having problems as soon as you buy it and shift in.
What Causes Failure Of The Septic System?
There are several different factors that may cause the septic system to fail. Some of the more common reasons include:
• The septic tank is too small
• The diameter of the drainage pipes are too small
• The drainfield is not large enough or it may not leveled correctly
• The soils in which the system is installed is unsuitable
• Tree roots have entered into the pipes and are causing a blockage
• Faulty surface drainage
The problem is, more often than not, by the time the homeowner realizes there is a problem the damage done would already be quite extensive. To make matters worse, without the proper knowledge and equipment it is almost impossible to determine the cause of the problem. Leaving it unattended or trying to contain the damage by trial and error will only make matters worse. The only way to prevent extensive damage is by calling in a professional to try and resolve the issue.
How Septic Tank Inspection and Maintenance Is Done
When you call a professional plumber to inspect the septic tank and carry out the necessary maintenance, they will come with all of the latest tools.
First they will test for a blockage or seepage by using a sewer camera or by the fluorescent dye method. After determining the exact cause of the problem, they will then use the correct tool to correct it. A sewer snake is usually used to clear a stubborn blockage if that is what is causing the problems. A sewer snake, also called an electric eel, is a long, slender and flexible pipe that is sent into the drain pipe. Though flexible and slender, the pipe is tough enough to dislodge the clog. If the blockage is caused by tree roots that have invaded the pipe, these are usually cut by using a specially designed device called a drain rooter.
Septic tanks help dispose of the dirty water from the house and purify it. However, for a septic tank to function efficiently, it must be maintained properly so that you do not have to suffer from clogged drains and a leaking plumbing system. Septic tank risers will help you have easier access to the area so that you can keep a check on it when necessary and also locate it easily.
Different Types of Septic Tank Risers
A septic tank riser will vary in size depending on the size of your tank. You will usually need one that is between six inches and twelve inches long with a diameter of twelve to twenty-four inches. If the container is buried deep underground, these devices may have to be stacked on top of each other.
There are three kinds of risers that you can purchase depending on the material that is used to make them.
The first and most basic option available is a concrete riser. This is usually quite heavy and it can be a little difficult to install. Concrete also suffer a lot of wear and tear so you may need to replace it often. This means that even though it is the cheapest option in the market, in the long run you may end up spending more because you will have to replace it more often than the others.
The other two options are PVC and Polyethylene risers. These are a lot more durable and they look better than the concrete ones. They are also lighter so it is easier to get them fitted to the tank. During their installation, gaskets are used in order to seal them. This makes the lids fit more securely and it prevents outside matter from getting inside the area. PVC and Polyethylene is also non-reactive to other chemicals so they don't get damaged easily and you will have to replace them very rarely.
Why Get a Riser?
A septic tank riser has two basic functions. First, it helps you locate the area. Even though this may not seem important, locating the container can often get difficult, especially when it is buried deep underground. In fact, building regulations now make it compulsory to install these accessories for all septic tanks that are located in the premises of the building. The other important function is to help you lift the lid of the container. Since these tanks are fastened securely and held down by steel screws, it can get very difficult to lift the lift without a riser. In fact, some risers are even made with structural ribs so that frost does not build on them and they can be used easily during all weather conditions.
Do you know where your septic tank is? Okay, so you can point to an area on your property and say "yeah, it's over there" with a hint of un-sureness. The next question is probably more important then the one just asked. Do you know where the lid to your septic tank is? Does that have you scratching your head?
Septic tanks by their very nature are buried, sometimes 3 feet or deeper underground. Out of sight out of mind so to speak. But that's not necessarily a good thing. There will come a time when your septic system begins to exhibit problems and needs some maintenance/repairs and the tank needs to be pumped out. Having a general idea as to the location of your tank can make getting this simple task done much more difficult.
There are two ways to deal with this problem and one way to make sure that in the future it won't be an issue. First let's look at finding the lid to the septic tank if you don't know where it is. You can either dig for it yourself or have the septic pumping service do it. Doing it your self can be time consuming and not a lot of fun. Having the pumping service do it can be costly.
Generally it is done in this fashion. You or someone you hire has to dig down until they find the top of the septic tank. That is usually the easy part of the process. Once you find the top of the tank you then need to find the lid. This can involve digging concentric circles outward from your initial hole until you find the lid. Once you find the lid now is the time to fix the problem; install a riser.
A septic tank riser is essentially a large tube that extends from the lid of the tank up to the surface of the ground. Once installed it will provide quick access to the septic tank that's easy to find any time there is a problem or it needs to be pumped out.
There are three basic types of risers to choose from; concrete, PVC, and polyethylene.
While concrete risers are generally cheaper it isn't the best choice. A concrete riser is heavy and may need heavy equipment to lift and install it. It is also more apt to leak then the other materials and may have rust problems if rebar is used to strengthen the cement.
PVC and polyethylene risers are lightweight and easy to install. They are resistant to corrosion and of course will not rust. They also incorporate a gasket seal to keep water from entering and prevent sewer gases from escaping from a leaky lid. The increased cost of these two types of risers is well worth it. They are virtually maintenance free and will easily last for the life of the whole septic system.
Every septic tank needs a riser and in many places they are now a code requirement. If you don't have one it might be worth having one installed before something goes wrong with your septic system. Quick access to the tank is one of the first steps to diagnosing any problems.
Septic Tank Price Washington