Septic systems are most often found in rural areas of Chehalis WA and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in Chehalis WA means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in Chehalis WA?
New septic system costs can be through the roof if you live in the wrong part of the country and unfortunately, there isn't much you can do about it. Unless you can do some of the work yourself or you have friends in the septic industry.
Septic systems do not come with price tags attached to them. So it becomes difficult to get a quote on the price of a new septic system, unless you ask the right questions and the right person to ask them to. Here we tell you how you should do that research, not only for a new septic system, but to also know of the costs of maintaining once it gets installed.
Estimating the Price of a New Septic System
The most important factors that make a difference in the price of a septic processing system are the construction material, the area where you live, the quality that you want, and the company that will install the system for you
The single biggest factor is the region or the area of your residence or installation. The prices range from $3,000 to $15,000.
Another important factor is the material used in construction. High-density polyethylene tanks are costlier than concrete tanks; they last longer too. Aerobic systems are even more costly.
To find the cost of permits that you need to build a septic processing system, you should call up the local Town Hall. To find the new septic tank costs in your neighborhood, ask your friends and neighbors about the cost of their systems. The local Realtors know a lot of the prices and the companies that are active in the area too.
Maintenance Costs of a Septic System
Your average system costs around $30-$750 to maintain. The standard gravity-fed systems need to be repaired and maintained once every 1-3 years, at a price of about $75-$300. Septic processing systems with sand and peat filters and the ones with wetlands construction cost around $50 to $1,700 per inspection and repair.
The average age of a septic system is about 20-40 years. If you take better care of your systems, doing regular inspection and maintenance, you will make them last longer. The difference can be decades. It's a worthwhile effort
Septic tank prices depend on various factors and it is not an easy task to make an accurate estimate of the price yourself. Licensed septic system installers are your best bet to make an accurate assessment of the price of the septic tank design you have in mind. But before you decide on the septic system you want, you have to first research it yourself. Here we tell you about the prices of septic tanks and how to find the best deals.
Septic System Prices for Various Components
Standard gravity-fed septic systems constructed at ground level for a three bedroom house cost around $1,500 to $4,000. Also, plastic vaults, thought smaller in size, cost more than the gravel ones.
Extra bedroom would require you to spend more because of the added capacity required of the tank and the system as a whole. Fine and silty soil also requires a larger drain field, which translates to higher costs. Good quality drain gravel is around $9 - $12 per ton, if it is not too far from the house. Drain field vaults are priced at around $25 to $40. Concrete tanks 1000 galloon in size cost around $500-$700 and that usually comes with free delivery within 50 miles of the contractor. 1250 gallon tanks cost about $600-$800. You should also know about the local laws regarding minimum tank size allowed for your house. Components like septic tanks, drain gravel, vaults and pipes do not have much variation. However, they can vary from state to state. So if you live near state lines, inquiry about the prices of those components in your neighboring state and, if they are cheaper, buy them there.
Pressure systems cost around $3,000 to $5,000+, but generally these are rarely installed by contractors. Some local regulations require an electrician to install the wiring for a pressure system, but in other places the installer can do that himself.
Septic System Maintenance Costs
Maintenance for a septic system needs to be done on a regular basis, so the cost of maintenance should be taken into account when you get a new septic tank. For a new drain field or mound-style septic system, annual maintenance charges range from $30 to $750. The pumping cost for standard gravity-fed tanks costs somewhere around $75 to $300 for every pumping, which is required once every 1-3 years. Usually, different septic contractors charge different rates, so make sure you shop around to find the best prices for what you need.
Go to my website to learn more about septic tank prices or maybe even septic tank risers. While you are there, make sure you download my free report discussing the top septic tank treatments.
There are multiple costs associated with a Septic System. I'll start with an explanation of the costs and give the actual estimates at the bottom:
Explanation of Septic Costs:
Cost to Pump Out the Septic Tank: Homeowners should have a licensed septic contractor pump out their septic tank every 3 to 5 years. If the tank is never pumped, then grease and other particles will flow into the leach field and clog the distribution pipes and the surrounding soil. Once that happens, he will need to have a new leach field installed at a cost of $10,000+.
Cost of Septic System Testing with Dye: Septic testing involves adding dye and running water in the house for approximately 30 minutes. Then, the contractor can check for flooding and see where the dye appears. There can be a variety of problems with a septic system, and these problems don't necessarily mean that the whole system must be replaced. This test will help the contractor diagnose the problem.
Cost to Remove Clog in Pipe To Tank: If the homeowner notices slow flushing toilets, he might assume there's a problem with the septic system, so they have a dye test done. If the dye test doesn't cause water and dye to show up in the leach field, then the problem might be a simple clog. A clog will require the assistance of a licensed plumber.
Cost of Complete Visual Inspection: Some septic contractors offer a complete visual inspection of the septic tank with a pumping. Needing this type of inspection is rare because problems with the actual septic tank will usually cause the leach field to fail, and once the leach field fails, you'll start noticing sewage in the yard.
Listing of Estimated Septic Costs:
Cost to Pump Out the Septic Tank: $150 to $250
Cost of Septic System Testing with Dye: $75 to $125
Cost to Remove Clog in Pipes to Tank: $50 to $250 (or more, if it's serious)
Cost of Complete Visual Inspection: $300 to $600
Regular septic tank inspections done by a professional plumber can help avert a major disaster caused by a septic system failure. Unfortunately, these are more common than you would think. Because the septic system runs underground, most homeowners tend to ignore it. However, failure to carry out regular inspections of the sewer system can be a health hazard and can also result in destruction of the surrounding property.
Before buying a new home, it is crucial to find out as much as you can about the system. Find out how old the system is and whether or not is has been regularly maintained. Better still, get an inspection done so that you do not start having problems as soon as you buy it and shift in.
What Causes Failure Of The Septic System?
There are several different factors that may cause the septic system to fail. Some of the more common reasons include:
• The septic tank is too small
• The diameter of the drainage pipes are too small
• The drainfield is not large enough or it may not leveled correctly
• The soils in which the system is installed is unsuitable
• Tree roots have entered into the pipes and are causing a blockage
• Faulty surface drainage
The problem is, more often than not, by the time the homeowner realizes there is a problem the damage done would already be quite extensive. To make matters worse, without the proper knowledge and equipment it is almost impossible to determine the cause of the problem. Leaving it unattended or trying to contain the damage by trial and error will only make matters worse. The only way to prevent extensive damage is by calling in a professional to try and resolve the issue.
How Septic Tank Inspection and Maintenance Is Done
When you call a professional plumber to inspect the septic tank and carry out the necessary maintenance, they will come with all of the latest tools.
First they will test for a blockage or seepage by using a sewer camera or by the fluorescent dye method. After determining the exact cause of the problem, they will then use the correct tool to correct it. A sewer snake is usually used to clear a stubborn blockage if that is what is causing the problems. A sewer snake, also called an electric eel, is a long, slender and flexible pipe that is sent into the drain pipe. Though flexible and slender, the pipe is tough enough to dislodge the clog. If the blockage is caused by tree roots that have invaded the pipe, these are usually cut by using a specially designed device called a drain rooter.
Septic tanks help dispose of the dirty water from the house and purify it. However, for a septic tank to function efficiently, it must be maintained properly so that you do not have to suffer from clogged drains and a leaking plumbing system. Septic tank risers will help you have easier access to the area so that you can keep a check on it when necessary and also locate it easily.
Different Types of Septic Tank Risers
A septic tank riser will vary in size depending on the size of your tank. You will usually need one that is between six inches and twelve inches long with a diameter of twelve to twenty-four inches. If the container is buried deep underground, these devices may have to be stacked on top of each other.
There are three kinds of risers that you can purchase depending on the material that is used to make them.
The first and most basic option available is a concrete riser. This is usually quite heavy and it can be a little difficult to install. Concrete also suffer a lot of wear and tear so you may need to replace it often. This means that even though it is the cheapest option in the market, in the long run you may end up spending more because you will have to replace it more often than the others.
The other two options are PVC and Polyethylene risers. These are a lot more durable and they look better than the concrete ones. They are also lighter so it is easier to get them fitted to the tank. During their installation, gaskets are used in order to seal them. This makes the lids fit more securely and it prevents outside matter from getting inside the area. PVC and Polyethylene is also non-reactive to other chemicals so they don't get damaged easily and you will have to replace them very rarely.
Why Get a Riser?
A septic tank riser has two basic functions. First, it helps you locate the area. Even though this may not seem important, locating the container can often get difficult, especially when it is buried deep underground. In fact, building regulations now make it compulsory to install these accessories for all septic tanks that are located in the premises of the building. The other important function is to help you lift the lid of the container. Since these tanks are fastened securely and held down by steel screws, it can get very difficult to lift the lift without a riser. In fact, some risers are even made with structural ribs so that frost does not build on them and they can be used easily during all weather conditions.
Do you know where your septic tank is? Okay, so you can point to an area on your property and say "yeah, it's over there" with a hint of un-sureness. The next question is probably more important then the one just asked. Do you know where the lid to your septic tank is? Does that have you scratching your head?
Septic tanks by their very nature are buried, sometimes 3 feet or deeper underground. Out of sight out of mind so to speak. But that's not necessarily a good thing. There will come a time when your septic system begins to exhibit problems and needs some maintenance/repairs and the tank needs to be pumped out. Having a general idea as to the location of your tank can make getting this simple task done much more difficult.
There are two ways to deal with this problem and one way to make sure that in the future it won't be an issue. First let's look at finding the lid to the septic tank if you don't know where it is. You can either dig for it yourself or have the septic pumping service do it. Doing it your self can be time consuming and not a lot of fun. Having the pumping service do it can be costly.
Generally it is done in this fashion. You or someone you hire has to dig down until they find the top of the septic tank. That is usually the easy part of the process. Once you find the top of the tank you then need to find the lid. This can involve digging concentric circles outward from your initial hole until you find the lid. Once you find the lid now is the time to fix the problem; install a riser.
A septic tank riser is essentially a large tube that extends from the lid of the tank up to the surface of the ground. Once installed it will provide quick access to the septic tank that's easy to find any time there is a problem or it needs to be pumped out.
There are three basic types of risers to choose from; concrete, PVC, and polyethylene.
While concrete risers are generally cheaper it isn't the best choice. A concrete riser is heavy and may need heavy equipment to lift and install it. It is also more apt to leak then the other materials and may have rust problems if rebar is used to strengthen the cement.
PVC and polyethylene risers are lightweight and easy to install. They are resistant to corrosion and of course will not rust. They also incorporate a gasket seal to keep water from entering and prevent sewer gases from escaping from a leaky lid. The increased cost of these two types of risers is well worth it. They are virtually maintenance free and will easily last for the life of the whole septic system.
Every septic tank needs a riser and in many places they are now a code requirement. If you don't have one it might be worth having one installed before something goes wrong with your septic system. Quick access to the tank is one of the first steps to diagnosing any problems.
Septic Tank Price Washington