Septic systems are most often found in rural areas of 98355 and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in 98355 means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in 98355?
For millions of people living in rural settings septic tank pumping is a fact of life. With the closest municipal sewage hookup miles away a properly maintained and working septic system is vitally important and getting it pumped out at regular intervals is a part of that maintenance. In this article we will look at why getting it pumped out regularly is so important, how it is done and about how much you can expect to pay for this service.
But before we get into all that let's take a quick look at what a septic system is and how it works. In simplest terms a septic system is an underground sewage treatment system for homes that do not have access to municipal sewer services. It typically is comprised of four parts; the waste pipe from the house, the septic tank, the drain field and the soil. All these parts need to in working order but the tank itself is the most important part.
Getting the tank pumped out at regular intervals keeps it working properly and prevents clogs that can cause sewage to back up into the house and create disgusting odors. The primary contributor to septic tank clogs are things that very biodegradable. This includes cooking grease and oils that get dumped down the drain and paper products other then toilet paper; paper towels, sanitary napkins and tampons, cigarette butts and cotton balls will all eventually degrade but they tend to get stuck in the inner working of the tank and create clogs that worsen over time.
Another reason to get a septic tank pumped regularly is to check it for damage that can compromise its ability to work in an efficient manner. Once it's pumped out it can be visually inspected for cracks and other damage. If any damage is detected it needs to be repaired to prevent future problems.
The pumping process itself is pretty straight forward. A large truck, sometimes referred to as a "Honey Wagon", with a big tank, suction pump, and a large hoses will come to the property and park in the general vicinity of the septic tank. The operator will remove the manhole cover from the tank, lower the suction hoses into it and fire up the pumps, sucking the accumulated waste into the holding tank on the truck.
A good pumping service will also provide a thorough inspection of the septic tank once it is pumped clean. They will inspect the tank, valves and inlet and outlet ports for damage such as cracks or clogs. They will also inspect the ground around the tank for signs of leaks as well. Any problems should be brought to the homeowner so that they can be dealt with to ensure the proper operation of the entire septic system.
The cost to get a septic tank pumped out varies and will depend on where you live along with a few other factors. Normally it will cost between $125 to $250 or more. The easier the job the less it will cost but there are some circumstances that can cause the price to increase.
The first problem many homeowners run into is knowing exactly where there septic tank is buried. This is particularly true for people who have purchased a home with an existing system. If it is buried and its location isn't readily apparent then your septic pumping service can use a plumbing snake with a radio emitter attached to the end. The snake is fed through one of the cleanouts in the house and out into the tank. A radio receiver is then used to find the end of the snake which gives the location of the tank.
Another problem is a lack of a septic riser over the lid covering the opening into the tank. If the pumping contractor has to dig down to find the lid this can add to the cost of the service. This is also the perfect opportunity to install a riser to avoid this issue for future pump outs.
The thing to remember when it comes the cost of pumping a septic tank out; The easier it is to for the pumper truck driver to find and access the tank the lower the overall cost will be. It can be well worth it to address any of these issues the first time you get your tank pumped out as it will keep costs down in the future.
Septic tank pumping is the most important part of maintaining a septic system. A clogged or overfull tank is the primary cause of many septic system problems that can be prevented through regularly scheduled visits by the "Honey Wagon".
To understand what is involved in septic tank pumping, it is first important to understand what a septic system is, what it does and how it works. A septic system is, very simply, an underground treatment system for household sewage. A typical septic system consists of 4 components: the pipe from the house, the septic tank, a drain field and the soil. Damage or malfunction of any of these components can cause the system to fail which can result in soil and drinking water contamination and costly repairs or replacements by the homeowner.
How it works
A very basic explanation of how the system works begins with waste water leaving the house through the plumbing network inside the house to the pipe leading to the septic tank. The tank is buried underground and is usually constructed in a water tight manner of concrete, fiberglass or polyethylene. It is intended to hold the waste water long enough to allow the solids to settle to the bottom (to form sludge) and the oils to float to the top (to form scum). Some of the solid waste decomposes as well. There are compartments and a "t" shaped outlet from the septic tank that prevents the sludge and scum from leaving the tank to travel to the drain fields. Once the liquid enters the drain field, it is filtered through the several layers of soil for the final treatment by removal of harmful bacteria, viruses and nutrients.
Septic tank pumping is required periodically to remove the sludge and scum from the tank. If the sludge and scum is allowed to build up in the tank, it can clog the drainage from the septic tank and the drain field. Your local septic service company in Molalla can provide periodic inspections as well as pumping and cleaning of your tank to keep everything working as it was designed.
The pumping process
The process of septic tank pumping involves the use of a large tank truck with suction pumps and hoses. The hoses are inserted into the manhole opening at the ground level to remove the scum and sludge accumulation. The sludge and scum are sucked into the tank on the truck and it is later disposed of in an approved manner and place. The septic service companies in Molalla will inspect the tank, valves and the ground around the system to assess for leaks or clogged areas. Areas needing attention will be brought to the attention of the homeowner and an appropriate resolution suggested.
Since septic tanks may get blocked with waste products over a period of time, it is always better to get them serviced on a regular basis. Septic tank pumping is necessary at times to enhance the lifespan of these systems and also to prevent solid waste from accumulating enough to reach the surface area of the tank. However, it is very important to know the exact time when your septic system needs to be pumped.
According to most experts from some of the cities in the US, like Lawrenceville and Monroe, it is better not to wait till your cesspit is full in order to clean it. Some important points to remember in order to know the exact time for septic tank pumping are:
1. Size of the tank: It is very important to know the exact size of your cesspit in order to know the ideal time to clean it. In order to know when your cesspit needs pumping, you may contact the local health department with the size of it and also the total number of people residing in your home. They would be able to tell you how often your cesspit needs cleaning.
2. Do not wait for any symptoms: According to most experts from some of the major cities in the US, like Duluth and Lawrenceville, it is best not to wait for any signs that would tell you when to opt for septic tank pumping. Normally when these systems work, the waste settles at the bottom and the residue water passes on through the drain field. Once this waste accumulates a lot, it would tend to push its way into the drain field. This would in turn prevent the smooth passage of water. It is always better to opt for septic tank pumping before this happens.
3. Check visually: Most of the cesspits have easy access for you to look inside. Check visually on a regular basis to see that the waste does not accumulate too much. It is good to remember that solid waste should not take up more than 30% of the total area.
So you have realized that your septic tank is an important part of your property but how exactly do you maintain it? Much like a car, a little maintenance will go a long way towards the life system. Follow these steps to properly maintain your septic system.
1. Locate Your Tank
While this may seem obvious, finding your septic tank is a little more difficult than what many think. They are buried deep underground and if your house has any age to it there is probably no visible signs as to where your system could be. If you happen to have a basement you can go down and follow your sewer lines out the wall to give you an idea as to where your septic tank might be buried. Otherwise, leave it to the professionals to locate it. They have special tools like an insulated piping they stick deep into the ground to find your tank and all its's components. Once located make sure you mark it in some way for future reference.
2. Uncover the Manhole and Inspection Ports
More than likely the man hole and inspection ports on your septic tank are buried down with the tank itself. This will require some digging at might be wise to replace with elevated access covers or risers for future inspectors to easily locate your system.
3. Check Your Connections
Since you are already going to all this trouble to check your septic tank system it would be wise to go ahead and check all your plumbing as well. This can be easily done by flushing toilets, running water in faucets, or running a load through the washer to make sure all your plumbing connections are working properly and flowing through your tank.
4. Measure the Scum and Sludge Layers
Now we're to the nitty gritty. Let us preface by saying you should NOT do this your self. Allow a trained inspector measure your septic tank system. It can be very dangerous to try and do this without training. Inserting a tool through the inspection port, the inspector will measure your tank and see where your levels of scum and sludge lay. This will also include a visual inspection of these levels.
If the sludge depth is equal to 1/3 the liquid depth your septic tank is in need of a pumping. If the tank is 1/3 full in general it also will need to be pumped. It is highly advised to pump your system when the inspector recommends; like mentioned in previous posts a little work now will greatly increase the life of the tank and save you a lot of time and money.
**WORD OF CAUTION**
As mentioned above, ONLY allow a trained professional inspect your septic tank. This is a tank full of waste; toxic gases created by the natural process in the tank can kill in MINUTES. Merely looking down into the tank can be hazardous to your health.
5. Checking your Septic Tank and It's Drainfield
After checking the scum and sludge layers of the tank the inspector will check for any cracks in the walls and drainfield for any signs of failure. If there are any additional pieces of equipment with your septic tank system, such as a distribution box, drop box, or pump, he will inspect these as well. After a thorough inspection the inspector will give you his recommendation as to what you should do to properly maintain your septic tank.
If you need to pump your septic tank it is very important that you hire a professional licensed contractor. There are many things that could be damaged in the process of pumping your tank, such as the contractor using the inspection port instead of the manhole to pump out the waste. It is recommended to be present at the time the contractor is pumping your tank. Since you are spending all the time and money on getting your tank cleaned, make sure that he pumps it ALL. You do not need to have anything in your septic tank to restart the process inside the tank, nor do you need to scrub or clean the inside of the septic tank.
This is the single most important thing you can do for your system. If it gets too full solids can move to the drainfield causing clogging and a whole "heap" of other problems.
Septic tank is a necessity in every household when there is no available centralized community wastewater treatment especially in the rural areas. Septic is where all the wastewater from the household runs into before it is drained in the environment. Maintaining and taking care of your septic system is not difficult because the modern design of septic tank system functions efficiently. There is however few guidelines you need to follow in order to keep your tank functioning effectively for a long time. Here are some tips to have a trouble-free tank system.
First, you must not allow the rainwater coming from the roof gutters to be diverted at the drainfield. A wet drainfield may no longer absorb and neutralize the effluent liquid from the septic system. The drainfield must be kept dry at most times because that is where the liquid from the septic system goes. You must plan your landscaping by planting grass on top of the drainfield. They will help absorb the excess water when the drainfield becomes soggy. Just make sure that the grasses will not have roots that can reach the lateral pipes to prevent going through the perforations. Additionally, keep trees away from the septic system. The roots of the trees can damage the pipes and the septic tank itself.
Second, you must avoid overloading the septic tank by reducing excessive use of water. Check your faucets of any leaks and repair at once. You can also use aerators on faucets and flow reducer nozzles on bathroom showers to lessen the consumption of water. When doing your laundry reduce the water levels especially for small loads. If you will run the dishwasher wait until it is full. Do not use the dishwasher for small dishes so you'll prevent using water often. Reduce the amount of water needed to flush the toilet by using displacer. You will not only overload the septic tank system but you can also save water.
Third, do not make your toilets as garbage disposal. Avoid flushing disposable diapers, sanitary napkins, paper towels, facial tissue, coffee ground, cigarette butts and filters. They will fill your septic tank system because some of these items are not biodegradable. They will also clog your septic tank system in less time and may pose bigger problems. Wise use of garbage disposal must be practiced. The amount of garbage that is added in the septic system can pile up and make it fail. Choose a top of the line garbage grinder so foods will be ground into tiny particles before it is disposed to the septic system. In this way it will be easier for the septic system to digest it.
Minimize the use of heavy cleaners and products with anti bacterial ingredients because this will kill the beneficial bacteria in the septic tank. The natural bacteria are the one that help in the digestion process of the wastewater in breaking down the solids turning it into liquid effluents. Additionally, avoid pouring hazardous chemicals, varnish, paints, thinner, gasoline, motor oils and other chemicals that may not only ruin the septic system but is also dangerous to the environment.
Septic Tank Price Washington