Septic systems are most often found in rural areas of Canby OR and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in Canby OR means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in Canby OR?
If you live in an area that uses septic systems for waste water disposal, from Portland, Oregon to New York City to Dallas, Texas to Miami, Florida, then I know you have known people who have had to either replace their septic systems or have had to make significant repairs to them. These were, I am quite sure, extremely expensive episodes for the home owners. Suffice it to say that septic system failures are not only expensive to repair or replace but the cleanup is also very costly as well as unsanitary. Hence, septic tank pumping should be a priority in your home maintenance routine.
How Often Should the Tank be pumped?
The experts recommend that septic tanks be emptied and the entire system inspected periodically. The frequency of this service is dependent upon several factors:
Size of the tank: this is pretty much self-explanatory. It follows that if you have a small tank, it will need to be pumped or emptied more often.
Amount of waste water processed: this factor is dependent upon the number of people who live in the home and how much water each of them use. One of the factors within this category includes the age of the toilets in the home. If you have a home that is more than 20 years old, it is likely that you will have the original bathroom fixtures and those fixtures may not be water efficient. The older style toilets require 3 to 5 gallons of water per flush, while the newer, more efficient models only require 1.5 or gallons per flush. There are also "dams" that can be placed inside the toilet tank to reduce the amount of water used per flush.
Where does the money saving come in?
Having your septic tank pumped (emptied) regularly can save hundreds of dollars in repairs, replacement and cleanup. The experts recommend that most systems be inspected and pumped about every 3 to 5 years depending on the above mentioned factors. When the septic service company comes to do the pumping, they will also inspect the system for leaks in the plumbing coming into and leaving the tank, the drain field and valves and filters in the tank. If damage or wear is noted on any part of the system, they can alert you so that plans to make the repairs can be made before the failure occurs. Preventing the failure of your system by periodic inspections and septic tank pumping will save money on major repairs and replacement as well as the cleanup process should a failure occur
If you have a septic system, then you are familiar with the term septic tank pumping. For those of you who do not know what a septic system is, it is an underground sewage system for household waste. It is not connected with the main sewage system. These systems are usually found in the rural areas.
So how does a septic system work? It is made up of four parts; the septic tank, the pipe that is connected to the house, the soil, and the drain field. From these four components, the septic tank is the most important, and needs a lot of maintenance. But, damage in any of the parts will cause the system to malfunction. This further leads to heavy repairs.
If you do not maintain the system you may face many problems like:
1. The tank may get clogged and begin to give off a disgusting odor. This happens when a lot of cooking oils and grease enters it, this blocks the inlet drains. These are very hard to degrade.
2. Most people who have septic systems fail to remember that all wastes are not biodegradable. Waste like paper towels, cigarette butts, sanitary towels, and cotton ear buds do not disintegrate. They enter the tank and clog it up.
3. You need to check the tank regularly for any cracks and damages. If you do detect any, you should get them repaired immediately.
To avoid these problems, you could have the tank pumped regularly. There are plenty of agencies that provide you with this service. They are quite easy to find if you look up the internet or the newspapers.
So what is septic tank pumping? Large tanks with suction pumps are used to pump out all the sludge and scum that has accumulated over time. The waste is sucked into a tank that is on the truck. Proper methods are later used to dispose of the waste.
It is important that the tank is pumped regularly. It ensures the smooth functioning of your septic system. It helps to keep your tank clean too.
The agencies that provide this service also provide other services for your septic system. You could employ them to come and perform regular checks. It will take the hassle of your hands.
In rural areas, you can find these septic tanks in almost every house. Septic tank is very essential in such locations to collect the sewage waste from house. Most of them install a tank with great care, but lack in maintenance. Effective maintenance of septic tank avoids many issue and future and cut downs the cost of septic services like cleaning and pumping.
Maintenance of septic tank is not a tough job and it requires simple precautions in dumping waste etc., to avoid major problems like repair and replacement of leachfiends, one should follow few simple steps of septic maintenance. Every contractor or a well-trained professional will suggest the first most common thing is to "Conserve Water".
Increase in the level of waste water will cause frequent cleaning and pumping activities of a container. So, reduce the usage of water, this can help in cutting down the cost. Avoid dumping heavy solid waste materials into the container. These solid wastes will cause severe damage to the septic system. They cause blockages or clogging in the drainfield that leads to repair or replacement.
Reduce the usage of chemical substances like cleaners as they kill the bacteria inside the tank. The bacteria are very useful for breaking the solid sludge to smaller particles. All these activities can help in cutting down the cost of septic tank cleaning and pumping.
One should pump out their tank at least once in a year. This depends on the number of people staying in the house, and usage of waster. The cost of pumping is not so costly. Contacting a right service provider can assist in performing the job successfully. In general, pumping a tank cost around $75 to $200. Pumping out larger containers will cost around $200 to$350 or more. If you would like to replace or install the new high-quality filter to protect your leachfield then, the cost would be $200 to $300.
While renting a cleaning and pumping service provider, you must be very cautious. Rent a professional service provider and make sure that you ask all your doubts on cleaning and pumping activities. Don't forget to ask about the discounts and offers in their company. Knowing about the offers can save you handsome amount of money. There are some companies that charge less than the cost provided above. But make sure you are electing a nice company for an effective service to your tank. The above specified costs are not constant in every company. They may vary according to the vendor and location.
Most of us pay ample value to the interiors of our homes, but often, we intentionally or unintentionally choose to avoid things that need attention like proper septic tank installation and maintenance. No matter where you have your home, having the right kind of septic tank installed and ensuring its maintenance is one aspect that you just cannot ignore. Before going in the details of how to choose a company, it is essential to understand the need to invest in such maintenance costs.
Avoid health hazards and damage to environment: In the case of septic tank failure, the local environment can be largely affected. This can lead to further health related hazards for your family and those families living nearby. This is a condition can often be immensely dangerous, and the effects can be there even after a long time.
Avoid the repair costs: Most people don't realise the simple fact that septic tank service is easy on the pocket rather than repairs. In fact, repairs can run in thousands of dollars, and in an unfortunate event where reinstallation is required, you are in for big troubles. Rather than investing so much in a single payment, hiring the services of a professional for cleaning, pumping and maintenance is a safer and better option any day.
Avoid property damage: Apart from the damage mentioned above, you can also face damage to the property values. If you are really concerned about your home and want to fetch a good resale value at a later stage, maintenance and upkeep of septic tank is something you just cannot ignore. Property evaluators may not consider your home to be worth of what you ask if there is any damage related to septic tank.
The main question lies in how to select the right company for septic tank cleaning, pumping and maintenance. It is obvious that a local company must be selected, but make sure that you take a look at the traits given below before choosing one.
Look for a construction company: Rather than looking for company that can offer maintenance, it is essential that you look for a company that is well versed with installation, repairs and other tasks. This will not only bring you the best expertise, but at the same time, you can get emergency services when required.
Look for costs: The costs of annual septic tank maintenance contracts can vary from one company to another, and this is also large dependent on the tank type you have. While looking for hiring a company, ask for quote and compare the same with others.
Look for experience: Always choose a licensed company over a company that is still looking for it. It is important that your company has the right experience to handle repairs, pumping, cleaning and maintenance, and when required, they must be available for service. A reputed company should good at commercial and residential sites alike.
Check online on a few company websites for details on septic tank maintenance.
Where your waste goes after it gets flushed down the toilet isn't something that many of us think about very often, nor should it be. Thanks to technological advances in the last century, plumbing and public sanitation has become much more convenient, hygienic and precise. The vast majority of those of us who live in metropolitan areas have our home sewer lines tapped into the city sewer mains, which means that our waste travels to a public treatment plant to be processed. For homes and businesses that cannot tap into public sewer lines, however, using a septic tank is an option that provides similar results in a different manner.
They are large holding tanks for sewage, almost always located below ground. They are usually constructed of plastic, and are often able to contain many weeks worth of waste. A septic tank can generally allow for the permanent disposal of waste in one of three ways: by being pumped out on a regular basis, by having bacteria or chemicals applied that eats away the waste naturally, or be allowing the waste to be dispersed naturally into the ground through a leech field. In all of these cases, septic tanks usually require less maintenance than you would think after the initial installation is complete.
A tank is generally called for in a couple of different scenarios. The first and most common is in more rural areas that do not have public city sewer systems available to tap into. The tax dollars that we pay as residents of a city go partially toward providing sanitary services, one of which is maintaining a public sewage treatment plant and sewer system. If, however, your home or business is located too far away from existing city sewer lines, it becomes necessary to dispose of your own waste by installing a septic tank system. Generally, permanent tanks are relatively affordable, can be installed in a few days, and are reliable.
Another scenario where septic tanks might be necessary is on temporary, extensive construction projects that will require many laborers over a longer period of time. In this case, portable toilets might be too temporary and inadequate, but actually building a sewer main to attach to the city sewers might be too expensive and time consuming. In this case, a small tank system is a more intelligent solution that can be used temporarily and then removed when the construction project is complete.
If you think that you might need to have a tank system installed at a home, business or constructions site, make sure that you research local contractors to see who offers the best prices and service. Thanks to modern technology, you shouldn't notice any discernible difference between being attached to a public sewer system and using a septic tank.
For those non-city folks that rely on a septic system instead of a city sewer, having a failed septic system is a major headache. It is amazing to hear the horror stories, as well as, the vast amount of mis-information being circulated about septic tanks, leaching systems, septic system repair costs, etc.
With over 30 years of experience in the design engineering of subsurface sewage disposal systems, commonly called "Septic Systems", I've prepared this easy to follow 12 step outline as a guide in replacing a Septic System. There is one very important pre-qualification before you start, you need to retain a qualified professional civil engineer or registered sanitarian. I have to stress the word "qualified", unless you want to enjoy being the leading role in the next release of "Horror Stories from the Leaching Field". Take the time to do a little homework, such as going to your local Health Board office and asking what civil engineers are designing septic systems in your Town and whose design plans are typically approved without having to be sent back for corrections and revisions. Once you get a few names, do a little research on the web, Better Business Bureau, etc. Then you should contact these civil engineers and talk with them about your problem septic system and ask for a written proposal that will outline the tasks and costs. Just like you wouldn't eat a rotten piece of fruit, if you don't have a good feeling about a particular civil engineer, then do not hire him!
Now you are ready to go forward with the 12 steps.
1. A test application is submitted to the local Health office (some States, like Rhode Island, control the testing, etc. so the application would have to go to a State agency.)
2. You hire an excavation contractor to dig the test holes. If you do not know a local excavating contractor, then your engineer should provide you with a few contact names. (FYI - by hiring a contractor for the test holes, you are not making a commitment or obligation to hire him to install the replacement septic system.) This excavation contractor will need to follow local / state safety regulations (such as obtaining a "dig-safe" number and having the underground electric, telephone, CATV, gas, etc. located before the test holes are dug.
3. The engineer coordinates with the Health Agent, excavating contractor and you (the client) to set the testing date.
4. The engineer performs the official deep hole soil evaluation and associated "perc" percolation testing. Soil samples may have to be obtained and taken to a lab for further testing. The engineer prepares the official forms (soil logs) and submits a copy to the local health office and to you.
5. The engineer performs a limited existing conditions topographic "topo" survey of your property where the replacement septic system is proposed. (FYI - Unless you have a small lot or do not know where your lot lines and/or lot corners are located, you typically would not need to have your property line surveyed.)
6. The engineer uses the results of the soil evaluation, perc. testing, topo survey in combination with the current and anticipated building use (number of bedrooms, garbage grinder, etc.) and State / Local Sanitary Codes to design a replacement septic system for your property.
7. The formal design plans (with the original seal and signature of the professional civil engineer) and construction permit application are submitted to the local Health Agency for review and approval.
8. The engineer provides you with additional copies of the design plans for you to submit to licensed contractors to obtain a price quote / bid.
9. Once you have selected a contractor, he coordinates with the local Health Agency (to obtain the permit) and the engineer, prior to starting the work.
10. The Health Agent visits the construction site as the work progresses to observe and confirm Code compliance.
11. The engineer, in most States, must visit the construction site to observe the critical construction stages, make measurements and prepare a formal plan showing the completed "as-built" septic system. The engineer submits a copy of this plan to you and the local Health Agency along with a signed compliance statement. Some States also require the contractor to sign and submit a compliance statement.
12. The local Health Agency reviews the "as-built" plan, etc. and issues a "Certificate of Compliance" which signifies that the replacement septic system as installed is in compliance with the State and Local Sanitary Code.
One other item, if you have wetlands on or near your property and the anticipated work will be within 100 ft. of these wetlands, then additional permitting will be necessary before you can have the replacement septic system installed.
Septic Tank Inspection Oregon