Septic systems are most often found in rural areas of 98668 and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in 98668 means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in 98668?
New septic system costs can be through the roof if you live in the wrong part of the country and unfortunately, there isn't much you can do about it. Unless you can do some of the work yourself or you have friends in the septic industry.
Septic systems do not come with price tags attached to them. So it becomes difficult to get a quote on the price of a new septic system, unless you ask the right questions and the right person to ask them to. Here we tell you how you should do that research, not only for a new septic system, but to also know of the costs of maintaining once it gets installed.
Estimating the Price of a New Septic System
The most important factors that make a difference in the price of a septic processing system are the construction material, the area where you live, the quality that you want, and the company that will install the system for you
The single biggest factor is the region or the area of your residence or installation. The prices range from $3,000 to $15,000.
Another important factor is the material used in construction. High-density polyethylene tanks are costlier than concrete tanks; they last longer too. Aerobic systems are even more costly.
To find the cost of permits that you need to build a septic processing system, you should call up the local Town Hall. To find the new septic tank costs in your neighborhood, ask your friends and neighbors about the cost of their systems. The local Realtors know a lot of the prices and the companies that are active in the area too.
Maintenance Costs of a Septic System
Your average system costs around $30-$750 to maintain. The standard gravity-fed systems need to be repaired and maintained once every 1-3 years, at a price of about $75-$300. Septic processing systems with sand and peat filters and the ones with wetlands construction cost around $50 to $1,700 per inspection and repair.
The average age of a septic system is about 20-40 years. If you take better care of your systems, doing regular inspection and maintenance, you will make them last longer. The difference can be decades. It's a worthwhile effort
Septic tank prices depend on various factors and it is not an easy task to make an accurate estimate of the price yourself. Licensed septic system installers are your best bet to make an accurate assessment of the price of the septic tank design you have in mind. But before you decide on the septic system you want, you have to first research it yourself. Here we tell you about the prices of septic tanks and how to find the best deals.
Septic System Prices for Various Components
Standard gravity-fed septic systems constructed at ground level for a three bedroom house cost around $1,500 to $4,000. Also, plastic vaults, thought smaller in size, cost more than the gravel ones.
Extra bedroom would require you to spend more because of the added capacity required of the tank and the system as a whole. Fine and silty soil also requires a larger drain field, which translates to higher costs. Good quality drain gravel is around $9 - $12 per ton, if it is not too far from the house. Drain field vaults are priced at around $25 to $40. Concrete tanks 1000 galloon in size cost around $500-$700 and that usually comes with free delivery within 50 miles of the contractor. 1250 gallon tanks cost about $600-$800. You should also know about the local laws regarding minimum tank size allowed for your house. Components like septic tanks, drain gravel, vaults and pipes do not have much variation. However, they can vary from state to state. So if you live near state lines, inquiry about the prices of those components in your neighboring state and, if they are cheaper, buy them there.
Pressure systems cost around $3,000 to $5,000+, but generally these are rarely installed by contractors. Some local regulations require an electrician to install the wiring for a pressure system, but in other places the installer can do that himself.
Septic System Maintenance Costs
Maintenance for a septic system needs to be done on a regular basis, so the cost of maintenance should be taken into account when you get a new septic tank. For a new drain field or mound-style septic system, annual maintenance charges range from $30 to $750. The pumping cost for standard gravity-fed tanks costs somewhere around $75 to $300 for every pumping, which is required once every 1-3 years. Usually, different septic contractors charge different rates, so make sure you shop around to find the best prices for what you need.
Go to my website to learn more about septic tank prices or maybe even septic tank risers. While you are there, make sure you download my free report discussing the top septic tank treatments.
There are multiple costs associated with a Septic System. I'll start with an explanation of the costs and give the actual estimates at the bottom:
Explanation of Septic Costs:
Cost to Pump Out the Septic Tank: Homeowners should have a licensed septic contractor pump out their septic tank every 3 to 5 years. If the tank is never pumped, then grease and other particles will flow into the leach field and clog the distribution pipes and the surrounding soil. Once that happens, he will need to have a new leach field installed at a cost of $10,000+.
Cost of Septic System Testing with Dye: Septic testing involves adding dye and running water in the house for approximately 30 minutes. Then, the contractor can check for flooding and see where the dye appears. There can be a variety of problems with a septic system, and these problems don't necessarily mean that the whole system must be replaced. This test will help the contractor diagnose the problem.
Cost to Remove Clog in Pipe To Tank: If the homeowner notices slow flushing toilets, he might assume there's a problem with the septic system, so they have a dye test done. If the dye test doesn't cause water and dye to show up in the leach field, then the problem might be a simple clog. A clog will require the assistance of a licensed plumber.
Cost of Complete Visual Inspection: Some septic contractors offer a complete visual inspection of the septic tank with a pumping. Needing this type of inspection is rare because problems with the actual septic tank will usually cause the leach field to fail, and once the leach field fails, you'll start noticing sewage in the yard.
Listing of Estimated Septic Costs:
Cost to Pump Out the Septic Tank: $150 to $250
Cost of Septic System Testing with Dye: $75 to $125
Cost to Remove Clog in Pipes to Tank: $50 to $250 (or more, if it's serious)
Cost of Complete Visual Inspection: $300 to $600
So you have realized that your septic tank is an important part of your property but how exactly do you maintain it? Much like a car, a little maintenance will go a long way towards the life system. Follow these steps to properly maintain your septic system.
1. Locate Your Tank
While this may seem obvious, finding your septic tank is a little more difficult than what many think. They are buried deep underground and if your house has any age to it there is probably no visible signs as to where your system could be. If you happen to have a basement you can go down and follow your sewer lines out the wall to give you an idea as to where your septic tank might be buried. Otherwise, leave it to the professionals to locate it. They have special tools like an insulated piping they stick deep into the ground to find your tank and all its's components. Once located make sure you mark it in some way for future reference.
2. Uncover the Manhole and Inspection Ports
More than likely the man hole and inspection ports on your septic tank are buried down with the tank itself. This will require some digging at might be wise to replace with elevated access covers or risers for future inspectors to easily locate your system.
3. Check Your Connections
Since you are already going to all this trouble to check your septic tank system it would be wise to go ahead and check all your plumbing as well. This can be easily done by flushing toilets, running water in faucets, or running a load through the washer to make sure all your plumbing connections are working properly and flowing through your tank.
4. Measure the Scum and Sludge Layers
Now we're to the nitty gritty. Let us preface by saying you should NOT do this your self. Allow a trained inspector measure your septic tank system. It can be very dangerous to try and do this without training. Inserting a tool through the inspection port, the inspector will measure your tank and see where your levels of scum and sludge lay. This will also include a visual inspection of these levels.
If the sludge depth is equal to 1/3 the liquid depth your septic tank is in need of a pumping. If the tank is 1/3 full in general it also will need to be pumped. It is highly advised to pump your system when the inspector recommends; like mentioned in previous posts a little work now will greatly increase the life of the tank and save you a lot of time and money.
**WORD OF CAUTION**
As mentioned above, ONLY allow a trained professional inspect your septic tank. This is a tank full of waste; toxic gases created by the natural process in the tank can kill in MINUTES. Merely looking down into the tank can be hazardous to your health.
5. Checking your Septic Tank and It's Drainfield
After checking the scum and sludge layers of the tank the inspector will check for any cracks in the walls and drainfield for any signs of failure. If there are any additional pieces of equipment with your septic tank system, such as a distribution box, drop box, or pump, he will inspect these as well. After a thorough inspection the inspector will give you his recommendation as to what you should do to properly maintain your septic tank.
If you need to pump your septic tank it is very important that you hire a professional licensed contractor. There are many things that could be damaged in the process of pumping your tank, such as the contractor using the inspection port instead of the manhole to pump out the waste. It is recommended to be present at the time the contractor is pumping your tank. Since you are spending all the time and money on getting your tank cleaned, make sure that he pumps it ALL. You do not need to have anything in your septic tank to restart the process inside the tank, nor do you need to scrub or clean the inside of the septic tank.
This is the single most important thing you can do for your system. If it gets too full solids can move to the drainfield causing clogging and a whole "heap" of other problems.
Septic tank is a necessity in every household when there is no available centralized community wastewater treatment especially in the rural areas. Septic is where all the wastewater from the household runs into before it is drained in the environment. Maintaining and taking care of your septic system is not difficult because the modern design of septic tank system functions efficiently. There is however few guidelines you need to follow in order to keep your tank functioning effectively for a long time. Here are some tips to have a trouble-free tank system.
First, you must not allow the rainwater coming from the roof gutters to be diverted at the drainfield. A wet drainfield may no longer absorb and neutralize the effluent liquid from the septic system. The drainfield must be kept dry at most times because that is where the liquid from the septic system goes. You must plan your landscaping by planting grass on top of the drainfield. They will help absorb the excess water when the drainfield becomes soggy. Just make sure that the grasses will not have roots that can reach the lateral pipes to prevent going through the perforations. Additionally, keep trees away from the septic system. The roots of the trees can damage the pipes and the septic tank itself.
Second, you must avoid overloading the septic tank by reducing excessive use of water. Check your faucets of any leaks and repair at once. You can also use aerators on faucets and flow reducer nozzles on bathroom showers to lessen the consumption of water. When doing your laundry reduce the water levels especially for small loads. If you will run the dishwasher wait until it is full. Do not use the dishwasher for small dishes so you'll prevent using water often. Reduce the amount of water needed to flush the toilet by using displacer. You will not only overload the septic tank system but you can also save water.
Third, do not make your toilets as garbage disposal. Avoid flushing disposable diapers, sanitary napkins, paper towels, facial tissue, coffee ground, cigarette butts and filters. They will fill your septic tank system because some of these items are not biodegradable. They will also clog your septic tank system in less time and may pose bigger problems. Wise use of garbage disposal must be practiced. The amount of garbage that is added in the septic system can pile up and make it fail. Choose a top of the line garbage grinder so foods will be ground into tiny particles before it is disposed to the septic system. In this way it will be easier for the septic system to digest it.
Minimize the use of heavy cleaners and products with anti bacterial ingredients because this will kill the beneficial bacteria in the septic tank. The natural bacteria are the one that help in the digestion process of the wastewater in breaking down the solids turning it into liquid effluents. Additionally, avoid pouring hazardous chemicals, varnish, paints, thinner, gasoline, motor oils and other chemicals that may not only ruin the septic system but is also dangerous to the environment.
Septic Tank Price Washington