Septic systems are most often found in rural areas of Mineral WA and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in Mineral WA means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in Mineral WA?
So you have realized that your septic tank is an important part of your property but how exactly do you maintain it? Much like a car, a little maintenance will go a long way towards the life system. Follow these steps to properly maintain your septic system.
1. Locate Your Tank
While this may seem obvious, finding your septic tank is a little more difficult than what many think. They are buried deep underground and if your house has any age to it there is probably no visible signs as to where your system could be. If you happen to have a basement you can go down and follow your sewer lines out the wall to give you an idea as to where your septic tank might be buried. Otherwise, leave it to the professionals to locate it. They have special tools like an insulated piping they stick deep into the ground to find your tank and all its's components. Once located make sure you mark it in some way for future reference.
2. Uncover the Manhole and Inspection Ports
More than likely the man hole and inspection ports on your septic tank are buried down with the tank itself. This will require some digging at might be wise to replace with elevated access covers or risers for future inspectors to easily locate your system.
3. Check Your Connections
Since you are already going to all this trouble to check your septic tank system it would be wise to go ahead and check all your plumbing as well. This can be easily done by flushing toilets, running water in faucets, or running a load through the washer to make sure all your plumbing connections are working properly and flowing through your tank.
4. Measure the Scum and Sludge Layers
Now we're to the nitty gritty. Let us preface by saying you should NOT do this your self. Allow a trained inspector measure your septic tank system. It can be very dangerous to try and do this without training. Inserting a tool through the inspection port, the inspector will measure your tank and see where your levels of scum and sludge lay. This will also include a visual inspection of these levels.
If the sludge depth is equal to 1/3 the liquid depth your septic tank is in need of a pumping. If the tank is 1/3 full in general it also will need to be pumped. It is highly advised to pump your system when the inspector recommends; like mentioned in previous posts a little work now will greatly increase the life of the tank and save you a lot of time and money.
**WORD OF CAUTION**
As mentioned above, ONLY allow a trained professional inspect your septic tank. This is a tank full of waste; toxic gases created by the natural process in the tank can kill in MINUTES. Merely looking down into the tank can be hazardous to your health.
5. Checking your Septic Tank and It's Drainfield
After checking the scum and sludge layers of the tank the inspector will check for any cracks in the walls and drainfield for any signs of failure. If there are any additional pieces of equipment with your septic tank system, such as a distribution box, drop box, or pump, he will inspect these as well. After a thorough inspection the inspector will give you his recommendation as to what you should do to properly maintain your septic tank.
If you need to pump your septic tank it is very important that you hire a professional licensed contractor. There are many things that could be damaged in the process of pumping your tank, such as the contractor using the inspection port instead of the manhole to pump out the waste. It is recommended to be present at the time the contractor is pumping your tank. Since you are spending all the time and money on getting your tank cleaned, make sure that he pumps it ALL. You do not need to have anything in your septic tank to restart the process inside the tank, nor do you need to scrub or clean the inside of the septic tank.
This is the single most important thing you can do for your system. If it gets too full solids can move to the drainfield causing clogging and a whole "heap" of other problems.
Septic tank is a necessity in every household when there is no available centralized community wastewater treatment especially in the rural areas. Septic is where all the wastewater from the household runs into before it is drained in the environment. Maintaining and taking care of your septic system is not difficult because the modern design of septic tank system functions efficiently. There is however few guidelines you need to follow in order to keep your tank functioning effectively for a long time. Here are some tips to have a trouble-free tank system.
First, you must not allow the rainwater coming from the roof gutters to be diverted at the drainfield. A wet drainfield may no longer absorb and neutralize the effluent liquid from the septic system. The drainfield must be kept dry at most times because that is where the liquid from the septic system goes. You must plan your landscaping by planting grass on top of the drainfield. They will help absorb the excess water when the drainfield becomes soggy. Just make sure that the grasses will not have roots that can reach the lateral pipes to prevent going through the perforations. Additionally, keep trees away from the septic system. The roots of the trees can damage the pipes and the septic tank itself.
Second, you must avoid overloading the septic tank by reducing excessive use of water. Check your faucets of any leaks and repair at once. You can also use aerators on faucets and flow reducer nozzles on bathroom showers to lessen the consumption of water. When doing your laundry reduce the water levels especially for small loads. If you will run the dishwasher wait until it is full. Do not use the dishwasher for small dishes so you'll prevent using water often. Reduce the amount of water needed to flush the toilet by using displacer. You will not only overload the septic tank system but you can also save water.
Third, do not make your toilets as garbage disposal. Avoid flushing disposable diapers, sanitary napkins, paper towels, facial tissue, coffee ground, cigarette butts and filters. They will fill your septic tank system because some of these items are not biodegradable. They will also clog your septic tank system in less time and may pose bigger problems. Wise use of garbage disposal must be practiced. The amount of garbage that is added in the septic system can pile up and make it fail. Choose a top of the line garbage grinder so foods will be ground into tiny particles before it is disposed to the septic system. In this way it will be easier for the septic system to digest it.
Minimize the use of heavy cleaners and products with anti bacterial ingredients because this will kill the beneficial bacteria in the septic tank. The natural bacteria are the one that help in the digestion process of the wastewater in breaking down the solids turning it into liquid effluents. Additionally, avoid pouring hazardous chemicals, varnish, paints, thinner, gasoline, motor oils and other chemicals that may not only ruin the septic system but is also dangerous to the environment.
Most of us pay ample value to the interiors of our homes, but often, we intentionally or unintentionally choose to avoid things that need attention like proper septic tank installation and maintenance. No matter where you have your home, having the right kind of septic tank installed and ensuring its maintenance is one aspect that you just cannot ignore. Before going in the details of how to choose a company, it is essential to understand the need to invest in such maintenance costs.
Avoid health hazards and damage to environment: In the case of septic tank failure, the local environment can be largely affected. This can lead to further health related hazards for your family and those families living nearby. This is a condition can often be immensely dangerous, and the effects can be there even after a long time.
Avoid the repair costs: Most people don't realise the simple fact that septic tank service is easy on the pocket rather than repairs. In fact, repairs can run in thousands of dollars, and in an unfortunate event where reinstallation is required, you are in for big troubles. Rather than investing so much in a single payment, hiring the services of a professional for cleaning, pumping and maintenance is a safer and better option any day.
Avoid property damage: Apart from the damage mentioned above, you can also face damage to the property values. If you are really concerned about your home and want to fetch a good resale value at a later stage, maintenance and upkeep of septic tank is something you just cannot ignore. Property evaluators may not consider your home to be worth of what you ask if there is any damage related to septic tank.
The main question lies in how to select the right company for septic tank cleaning, pumping and maintenance. It is obvious that a local company must be selected, but make sure that you take a look at the traits given below before choosing one.
Look for a construction company: Rather than looking for company that can offer maintenance, it is essential that you look for a company that is well versed with installation, repairs and other tasks. This will not only bring you the best expertise, but at the same time, you can get emergency services when required.
Look for costs: The costs of annual septic tank maintenance contracts can vary from one company to another, and this is also large dependent on the tank type you have. While looking for hiring a company, ask for quote and compare the same with others.
Look for experience: Always choose a licensed company over a company that is still looking for it. It is important that your company has the right experience to handle repairs, pumping, cleaning and maintenance, and when required, they must be available for service. A reputed company should good at commercial and residential sites alike.
Check online on a few company websites for details on septic tank maintenance.
Where your waste goes after it gets flushed down the toilet isn't something that many of us think about very often, nor should it be. Thanks to technological advances in the last century, plumbing and public sanitation has become much more convenient, hygienic and precise. The vast majority of those of us who live in metropolitan areas have our home sewer lines tapped into the city sewer mains, which means that our waste travels to a public treatment plant to be processed. For homes and businesses that cannot tap into public sewer lines, however, using a septic tank is an option that provides similar results in a different manner.
They are large holding tanks for sewage, almost always located below ground. They are usually constructed of plastic, and are often able to contain many weeks worth of waste. A septic tank can generally allow for the permanent disposal of waste in one of three ways: by being pumped out on a regular basis, by having bacteria or chemicals applied that eats away the waste naturally, or be allowing the waste to be dispersed naturally into the ground through a leech field. In all of these cases, septic tanks usually require less maintenance than you would think after the initial installation is complete.
A tank is generally called for in a couple of different scenarios. The first and most common is in more rural areas that do not have public city sewer systems available to tap into. The tax dollars that we pay as residents of a city go partially toward providing sanitary services, one of which is maintaining a public sewage treatment plant and sewer system. If, however, your home or business is located too far away from existing city sewer lines, it becomes necessary to dispose of your own waste by installing a septic tank system. Generally, permanent tanks are relatively affordable, can be installed in a few days, and are reliable.
Another scenario where septic tanks might be necessary is on temporary, extensive construction projects that will require many laborers over a longer period of time. In this case, portable toilets might be too temporary and inadequate, but actually building a sewer main to attach to the city sewers might be too expensive and time consuming. In this case, a small tank system is a more intelligent solution that can be used temporarily and then removed when the construction project is complete.
If you think that you might need to have a tank system installed at a home, business or constructions site, make sure that you research local contractors to see who offers the best prices and service. Thanks to modern technology, you shouldn't notice any discernible difference between being attached to a public sewer system and using a septic tank.
For those non-city folks that rely on a septic system instead of a city sewer, having a failed septic system is a major headache. It is amazing to hear the horror stories, as well as, the vast amount of mis-information being circulated about septic tanks, leaching systems, septic system repair costs, etc.
With over 30 years of experience in the design engineering of subsurface sewage disposal systems, commonly called "Septic Systems", I've prepared this easy to follow 12 step outline as a guide in replacing a Septic System. There is one very important pre-qualification before you start, you need to retain a qualified professional civil engineer or registered sanitarian. I have to stress the word "qualified", unless you want to enjoy being the leading role in the next release of "Horror Stories from the Leaching Field". Take the time to do a little homework, such as going to your local Health Board office and asking what civil engineers are designing septic systems in your Town and whose design plans are typically approved without having to be sent back for corrections and revisions. Once you get a few names, do a little research on the web, Better Business Bureau, etc. Then you should contact these civil engineers and talk with them about your problem septic system and ask for a written proposal that will outline the tasks and costs. Just like you wouldn't eat a rotten piece of fruit, if you don't have a good feeling about a particular civil engineer, then do not hire him!
Now you are ready to go forward with the 12 steps.
1. A test application is submitted to the local Health office (some States, like Rhode Island, control the testing, etc. so the application would have to go to a State agency.)
2. You hire an excavation contractor to dig the test holes. If you do not know a local excavating contractor, then your engineer should provide you with a few contact names. (FYI - by hiring a contractor for the test holes, you are not making a commitment or obligation to hire him to install the replacement septic system.) This excavation contractor will need to follow local / state safety regulations (such as obtaining a "dig-safe" number and having the underground electric, telephone, CATV, gas, etc. located before the test holes are dug.
3. The engineer coordinates with the Health Agent, excavating contractor and you (the client) to set the testing date.
4. The engineer performs the official deep hole soil evaluation and associated "perc" percolation testing. Soil samples may have to be obtained and taken to a lab for further testing. The engineer prepares the official forms (soil logs) and submits a copy to the local health office and to you.
5. The engineer performs a limited existing conditions topographic "topo" survey of your property where the replacement septic system is proposed. (FYI - Unless you have a small lot or do not know where your lot lines and/or lot corners are located, you typically would not need to have your property line surveyed.)
6. The engineer uses the results of the soil evaluation, perc. testing, topo survey in combination with the current and anticipated building use (number of bedrooms, garbage grinder, etc.) and State / Local Sanitary Codes to design a replacement septic system for your property.
7. The formal design plans (with the original seal and signature of the professional civil engineer) and construction permit application are submitted to the local Health Agency for review and approval.
8. The engineer provides you with additional copies of the design plans for you to submit to licensed contractors to obtain a price quote / bid.
9. Once you have selected a contractor, he coordinates with the local Health Agency (to obtain the permit) and the engineer, prior to starting the work.
10. The Health Agent visits the construction site as the work progresses to observe and confirm Code compliance.
11. The engineer, in most States, must visit the construction site to observe the critical construction stages, make measurements and prepare a formal plan showing the completed "as-built" septic system. The engineer submits a copy of this plan to you and the local Health Agency along with a signed compliance statement. Some States also require the contractor to sign and submit a compliance statement.
12. The local Health Agency reviews the "as-built" plan, etc. and issues a "Certificate of Compliance" which signifies that the replacement septic system as installed is in compliance with the State and Local Sanitary Code.
One other item, if you have wetlands on or near your property and the anticipated work will be within 100 ft. of these wetlands, then additional permitting will be necessary before you can have the replacement septic system installed.
Septic Tank Price Washington