Septic systems are most often found in rural areas of 98683 and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in 98683 means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in 98683?
So you have realized that your septic tank is an important part of your property but how exactly do you maintain it? Much like a car, a little maintenance will go a long way towards the life system. Follow these steps to properly maintain your septic system.
1. Locate Your Tank
While this may seem obvious, finding your septic tank is a little more difficult than what many think. They are buried deep underground and if your house has any age to it there is probably no visible signs as to where your system could be. If you happen to have a basement you can go down and follow your sewer lines out the wall to give you an idea as to where your septic tank might be buried. Otherwise, leave it to the professionals to locate it. They have special tools like an insulated piping they stick deep into the ground to find your tank and all its's components. Once located make sure you mark it in some way for future reference.
2. Uncover the Manhole and Inspection Ports
More than likely the man hole and inspection ports on your septic tank are buried down with the tank itself. This will require some digging at might be wise to replace with elevated access covers or risers for future inspectors to easily locate your system.
3. Check Your Connections
Since you are already going to all this trouble to check your septic tank system it would be wise to go ahead and check all your plumbing as well. This can be easily done by flushing toilets, running water in faucets, or running a load through the washer to make sure all your plumbing connections are working properly and flowing through your tank.
4. Measure the Scum and Sludge Layers
Now we're to the nitty gritty. Let us preface by saying you should NOT do this your self. Allow a trained inspector measure your septic tank system. It can be very dangerous to try and do this without training. Inserting a tool through the inspection port, the inspector will measure your tank and see where your levels of scum and sludge lay. This will also include a visual inspection of these levels.
If the sludge depth is equal to 1/3 the liquid depth your septic tank is in need of a pumping. If the tank is 1/3 full in general it also will need to be pumped. It is highly advised to pump your system when the inspector recommends; like mentioned in previous posts a little work now will greatly increase the life of the tank and save you a lot of time and money.
**WORD OF CAUTION**
As mentioned above, ONLY allow a trained professional inspect your septic tank. This is a tank full of waste; toxic gases created by the natural process in the tank can kill in MINUTES. Merely looking down into the tank can be hazardous to your health.
5. Checking your Septic Tank and It's Drainfield
After checking the scum and sludge layers of the tank the inspector will check for any cracks in the walls and drainfield for any signs of failure. If there are any additional pieces of equipment with your septic tank system, such as a distribution box, drop box, or pump, he will inspect these as well. After a thorough inspection the inspector will give you his recommendation as to what you should do to properly maintain your septic tank.
If you need to pump your septic tank it is very important that you hire a professional licensed contractor. There are many things that could be damaged in the process of pumping your tank, such as the contractor using the inspection port instead of the manhole to pump out the waste. It is recommended to be present at the time the contractor is pumping your tank. Since you are spending all the time and money on getting your tank cleaned, make sure that he pumps it ALL. You do not need to have anything in your septic tank to restart the process inside the tank, nor do you need to scrub or clean the inside of the septic tank.
This is the single most important thing you can do for your system. If it gets too full solids can move to the drainfield causing clogging and a whole "heap" of other problems.
Septic tank is a necessity in every household when there is no available centralized community wastewater treatment especially in the rural areas. Septic is where all the wastewater from the household runs into before it is drained in the environment. Maintaining and taking care of your septic system is not difficult because the modern design of septic tank system functions efficiently. There is however few guidelines you need to follow in order to keep your tank functioning effectively for a long time. Here are some tips to have a trouble-free tank system.
First, you must not allow the rainwater coming from the roof gutters to be diverted at the drainfield. A wet drainfield may no longer absorb and neutralize the effluent liquid from the septic system. The drainfield must be kept dry at most times because that is where the liquid from the septic system goes. You must plan your landscaping by planting grass on top of the drainfield. They will help absorb the excess water when the drainfield becomes soggy. Just make sure that the grasses will not have roots that can reach the lateral pipes to prevent going through the perforations. Additionally, keep trees away from the septic system. The roots of the trees can damage the pipes and the septic tank itself.
Second, you must avoid overloading the septic tank by reducing excessive use of water. Check your faucets of any leaks and repair at once. You can also use aerators on faucets and flow reducer nozzles on bathroom showers to lessen the consumption of water. When doing your laundry reduce the water levels especially for small loads. If you will run the dishwasher wait until it is full. Do not use the dishwasher for small dishes so you'll prevent using water often. Reduce the amount of water needed to flush the toilet by using displacer. You will not only overload the septic tank system but you can also save water.
Third, do not make your toilets as garbage disposal. Avoid flushing disposable diapers, sanitary napkins, paper towels, facial tissue, coffee ground, cigarette butts and filters. They will fill your septic tank system because some of these items are not biodegradable. They will also clog your septic tank system in less time and may pose bigger problems. Wise use of garbage disposal must be practiced. The amount of garbage that is added in the septic system can pile up and make it fail. Choose a top of the line garbage grinder so foods will be ground into tiny particles before it is disposed to the septic system. In this way it will be easier for the septic system to digest it.
Minimize the use of heavy cleaners and products with anti bacterial ingredients because this will kill the beneficial bacteria in the septic tank. The natural bacteria are the one that help in the digestion process of the wastewater in breaking down the solids turning it into liquid effluents. Additionally, avoid pouring hazardous chemicals, varnish, paints, thinner, gasoline, motor oils and other chemicals that may not only ruin the septic system but is also dangerous to the environment.
If you live in an area that uses septic systems for waste water disposal, from Portland, Oregon to New York City to Dallas, Texas to Miami, Florida, then I know you have known people who have had to either replace their septic systems or have had to make significant repairs to them. These were, I am quite sure, extremely expensive episodes for the home owners. Suffice it to say that septic system failures are not only expensive to repair or replace but the cleanup is also very costly as well as unsanitary. Hence, septic tank pumping should be a priority in your home maintenance routine.
How Often Should the Tank be pumped?
The experts recommend that septic tanks be emptied and the entire system inspected periodically. The frequency of this service is dependent upon several factors:
Size of the tank: this is pretty much self-explanatory. It follows that if you have a small tank, it will need to be pumped or emptied more often.
Amount of waste water processed: this factor is dependent upon the number of people who live in the home and how much water each of them use. One of the factors within this category includes the age of the toilets in the home. If you have a home that is more than 20 years old, it is likely that you will have the original bathroom fixtures and those fixtures may not be water efficient. The older style toilets require 3 to 5 gallons of water per flush, while the newer, more efficient models only require 1.5 or gallons per flush. There are also "dams" that can be placed inside the toilet tank to reduce the amount of water used per flush.
Where does the money saving come in?
Having your septic tank pumped (emptied) regularly can save hundreds of dollars in repairs, replacement and cleanup. The experts recommend that most systems be inspected and pumped about every 3 to 5 years depending on the above mentioned factors. When the septic service company comes to do the pumping, they will also inspect the system for leaks in the plumbing coming into and leaving the tank, the drain field and valves and filters in the tank. If damage or wear is noted on any part of the system, they can alert you so that plans to make the repairs can be made before the failure occurs. Preventing the failure of your system by periodic inspections and septic tank pumping will save money on major repairs and replacement as well as the cleanup process should a failure occur
If you have a septic system, then you are familiar with the term septic tank pumping. For those of you who do not know what a septic system is, it is an underground sewage system for household waste. It is not connected with the main sewage system. These systems are usually found in the rural areas.
So how does a septic system work? It is made up of four parts; the septic tank, the pipe that is connected to the house, the soil, and the drain field. From these four components, the septic tank is the most important, and needs a lot of maintenance. But, damage in any of the parts will cause the system to malfunction. This further leads to heavy repairs.
If you do not maintain the system you may face many problems like:
1. The tank may get clogged and begin to give off a disgusting odor. This happens when a lot of cooking oils and grease enters it, this blocks the inlet drains. These are very hard to degrade.
2. Most people who have septic systems fail to remember that all wastes are not biodegradable. Waste like paper towels, cigarette butts, sanitary towels, and cotton ear buds do not disintegrate. They enter the tank and clog it up.
3. You need to check the tank regularly for any cracks and damages. If you do detect any, you should get them repaired immediately.
To avoid these problems, you could have the tank pumped regularly. There are plenty of agencies that provide you with this service. They are quite easy to find if you look up the internet or the newspapers.
So what is septic tank pumping? Large tanks with suction pumps are used to pump out all the sludge and scum that has accumulated over time. The waste is sucked into a tank that is on the truck. Proper methods are later used to dispose of the waste.
It is important that the tank is pumped regularly. It ensures the smooth functioning of your septic system. It helps to keep your tank clean too.
The agencies that provide this service also provide other services for your septic system. You could employ them to come and perform regular checks. It will take the hassle of your hands.
In rural areas, you can find these septic tanks in almost every house. Septic tank is very essential in such locations to collect the sewage waste from house. Most of them install a tank with great care, but lack in maintenance. Effective maintenance of septic tank avoids many issue and future and cut downs the cost of septic services like cleaning and pumping.
Maintenance of septic tank is not a tough job and it requires simple precautions in dumping waste etc., to avoid major problems like repair and replacement of leachfiends, one should follow few simple steps of septic maintenance. Every contractor or a well-trained professional will suggest the first most common thing is to "Conserve Water".
Increase in the level of waste water will cause frequent cleaning and pumping activities of a container. So, reduce the usage of water, this can help in cutting down the cost. Avoid dumping heavy solid waste materials into the container. These solid wastes will cause severe damage to the septic system. They cause blockages or clogging in the drainfield that leads to repair or replacement.
Reduce the usage of chemical substances like cleaners as they kill the bacteria inside the tank. The bacteria are very useful for breaking the solid sludge to smaller particles. All these activities can help in cutting down the cost of septic tank cleaning and pumping.
One should pump out their tank at least once in a year. This depends on the number of people staying in the house, and usage of waster. The cost of pumping is not so costly. Contacting a right service provider can assist in performing the job successfully. In general, pumping a tank cost around $75 to $200. Pumping out larger containers will cost around $200 to$350 or more. If you would like to replace or install the new high-quality filter to protect your leachfield then, the cost would be $200 to $300.
While renting a cleaning and pumping service provider, you must be very cautious. Rent a professional service provider and make sure that you ask all your doubts on cleaning and pumping activities. Don't forget to ask about the discounts and offers in their company. Knowing about the offers can save you handsome amount of money. There are some companies that charge less than the cost provided above. But make sure you are electing a nice company for an effective service to your tank. The above specified costs are not constant in every company. They may vary according to the vendor and location.
Septic Tank Price Washington