Septic systems are most often found in rural areas of 98671 and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in 98671 means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in 98671?
Anyone who lives in a rural area should know that more often than not sewage is not disposed in the same way as it would be in a city or large town. Rural residents often depend upon septic tank systems being placed on their property to process waste from their homes, making them responsible for the regular maintenance that these systems require. To illustrate the need for maintenance to avoid septic tank repairs, we will give examples of what can go wrong, and how they can be avoided so that owning a septic system remains worry-free.
The Typical Septic System
The septic system most often found in rural areas will consist of a series of pipes connecting it to the home, a holding tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the leech field. These systems are often inspected before installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic system means that everyone understands the importance of having regular maintenance to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the leech field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When a septic system is installed, the area where the tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future. This includes letting utility workers know where the tank is, especially if you are having grading done on your land. The same goes for the pipes leading from the tank to the house and the drainage pipes leading to the leech field. If any are damaged, they can cause sewage to leak into the land around your home.
Some physical damage cannot be avoided. Shifting soil can damage pipes, or expose them to the elements. Extreme temperature shifts during winters can reach to where the tank is buried, and cause it to expand and crack. Regular maintenance by a licensed provider of septic tanks and septic tank repairs not only ensures that the holding tank is pumped out regularly but also includes a thorough physical inspection of the equipment and can spot potential cracks and leaks.
What Goes In Does Not Always Come Out
The most important thing to remember when using a septic tank system is that all the drains in your home lead to the septic tank, not just the toilet. Not everything is good for it and if the wrong substances enter the septic system, they can cause potentially expensive problems in the future. For example, to prevent unnecessary clogs in the holding tank, never put cooking oils, grease or caustic chemicals of any kind down your kitchen or bathroom drains. These items can congeal, clog up the filtering system or even potentially cause damage to the tank interior, or the pipes.
As far as the toilet is concerned, you can prevent septic tank repairs in the future by not putting anything in there to be flushed away that is not rated for use in a septic system. This includes feminine products, plastic, cleaning aids and even some brands of toilet paper. Unless it says that it is flushable in a septic system, or biodegradable, on the label, play it safe and do not drop and flush, simple as that. Regular maintenance on the system will prevent clogs from occurring and if there is matter in there that can clog it up, it will be removed when the tank is cleared and inspected.
Due to the daily use of septic tanks, the lives of humans are saved from the numerous diseases which get destroyed by these systems. Cesspits are mainly used to treat sewage, which in turn uses bacteria to break down the solid waste into smaller harmless substances. Septic tanks are mainly used in rural areas and in a number of cities in the US, like Gainesville and Buford; you would find numerous homes where such systems are used.
Just like any other utility devices, it is important to hire professional septic tank cleaners every now and then to get the entire system serviced. There are some common problems of septic systems which you should be aware of. Some of them are:
1. Napkins get blocked: It is normally recommended not to put any type of sanitary napkins or towels inside such tanks. These tend to block the entire system and fill up the tank with dirty water and other solid wastes.
2. Susceptible to damage: In most of the cities in the US, like Loganville and Gainesville, it is seen that cesspits get damaged due to playgrounds or storage buildings which are at a close proximity. In such cases the only option left would be to hire professional septic tank cleaners to take care of the problem.
3. Use of garbage disposers may put a lot of pressure on the system: It is best to avoid disposing waste food into the garbage disposers since it may put excessive pressure on the entire system which may prevent it from functioning properly.
4. Excessive water may overload the cesspits: At any time if you notice excessive water going in the septic tank then try to prevent it at all costs. Unreasonable amount of water would prevent the process of breaking down the solid wastes, which may block the entire system in the long run.
5. Grease is hard to break down: Try to avoid dumping excessive grease or cooking oil into the system, as this would block the inlet drains by filling up the upper layer of the cesspits.
A properly designed, constructed and maintained septic system should be virtually trouble free. Unfortunately things do go wrong and problems with the septic tank are usually the cause. But since they are buried, out of sight out of mind so to speak, it's not until a nasty odor starts to hang over the property that the homeowner is aware that something is amiss.
There are several things to watch for that will indicate if you are indeed having issues with your septic system. First, as mentioned earlier, is bad smells emanating from various areas of the house. The smell may be coming from toilets or drains, or it may just be lingering with no real identifiable source.
Toilets that flush slower then normal or backed up drains may also indicate a problem. Of course this may be nothing more then a clogged drain or pipe but if plunging or snaking doesn't fix the problem then it is probably a septic system problem.
You may also notice the proverbial "the grass is always greener over the septic tank" actually coming to life. If the grass over the septic drain field is noticeably more lush then surrounding areas, particularly during dry weather, this may be an indication that there is an issue with the tank.
There are a variety of things that may cause these problems and we have listed them out below.
1. Failure to get the septic tank pumped out at regular intervals. Proper maintenance will keep most septic systems running smoothly and number one on the maintenance list is regularly scheduled removal of built up solids and sludge.
2. Flushing non-biodegradable or slow to degrade items down the toilet or sink drains. Sanitary napkins, paper towels and cotton balls are all able to cause clogs in the systems pipes and the tank. Plastics and Styrofoam are even harder on septic systems as they are nearly impossible to break down and should never be flushed if at all possible.
3. Pouring cooking oil and grease down the sink drain will also cause major issues. It does not break down quickly and will cause clogs in the inlet and outlet drains as well as in the upper chamber. It can also cause odors and make pumping out the tank more difficult.
4. Limit the amount of food particles put into the system. While garbage disposals are a great convenience septic systems aren't designed to break down food wastes.
5. Too much or too little water in the system can also create problems. Excess water in the system can force sludge and solids into the drain field pipes resulting in clogs and environmental hazards. It can also cause a system failure resulting in expensive repairs.
Not enough water is also detrimental and can lead to a die off of the bacteria that breaks down the sewage. These bacteria are responsible for neutralizing the nitrogen that build up in septic tanks.
6. Inadequate tank ventilation can be another problem. Vents are used to ensure adequate airflow through the system and keep the pressure within the tank equalized. If these vents get plugged or don't work correctly there is a good chance that bad odors will result.
7. Dumping chemicals, paints, solvents, herbicides or pesticides into a septic system can cause un-repairable damage resulting in a complete system replacement elsewhere on the property. It can also cause harmful damage to the environment that could take many years to fix before returning to normal.
The best way to prevent septic tank problems is to follow the 7 points listed above and get the tank pumped out and inspected regularly. For most systems this is about every 2 to 3 years. Doing so will minimize potential problems and ensure that your system will work efficiently year after year.
New septic system costs can be through the roof if you live in the wrong part of the country and unfortunately, there isn't much you can do about it. Unless you can do some of the work yourself or you have friends in the septic industry.
Septic systems do not come with price tags attached to them. So it becomes difficult to get a quote on the price of a new septic system, unless you ask the right questions and the right person to ask them to. Here we tell you how you should do that research, not only for a new septic system, but to also know of the costs of maintaining once it gets installed.
Estimating the Price of a New Septic System
The most important factors that make a difference in the price of a septic processing system are the construction material, the area where you live, the quality that you want, and the company that will install the system for you
The single biggest factor is the region or the area of your residence or installation. The prices range from $3,000 to $15,000.
Another important factor is the material used in construction. High-density polyethylene tanks are costlier than concrete tanks; they last longer too. Aerobic systems are even more costly.
To find the cost of permits that you need to build a septic processing system, you should call up the local Town Hall. To find the new septic tank costs in your neighborhood, ask your friends and neighbors about the cost of their systems. The local Realtors know a lot of the prices and the companies that are active in the area too.
Maintenance Costs of a Septic System
Your average system costs around $30-$750 to maintain. The standard gravity-fed systems need to be repaired and maintained once every 1-3 years, at a price of about $75-$300. Septic processing systems with sand and peat filters and the ones with wetlands construction cost around $50 to $1,700 per inspection and repair.
The average age of a septic system is about 20-40 years. If you take better care of your systems, doing regular inspection and maintenance, you will make them last longer. The difference can be decades. It's a worthwhile effort
Septic tank prices depend on various factors and it is not an easy task to make an accurate estimate of the price yourself. Licensed septic system installers are your best bet to make an accurate assessment of the price of the septic tank design you have in mind. But before you decide on the septic system you want, you have to first research it yourself. Here we tell you about the prices of septic tanks and how to find the best deals.
Septic System Prices for Various Components
Standard gravity-fed septic systems constructed at ground level for a three bedroom house cost around $1,500 to $4,000. Also, plastic vaults, thought smaller in size, cost more than the gravel ones.
Extra bedroom would require you to spend more because of the added capacity required of the tank and the system as a whole. Fine and silty soil also requires a larger drain field, which translates to higher costs. Good quality drain gravel is around $9 - $12 per ton, if it is not too far from the house. Drain field vaults are priced at around $25 to $40. Concrete tanks 1000 galloon in size cost around $500-$700 and that usually comes with free delivery within 50 miles of the contractor. 1250 gallon tanks cost about $600-$800. You should also know about the local laws regarding minimum tank size allowed for your house. Components like septic tanks, drain gravel, vaults and pipes do not have much variation. However, they can vary from state to state. So if you live near state lines, inquiry about the prices of those components in your neighboring state and, if they are cheaper, buy them there.
Pressure systems cost around $3,000 to $5,000+, but generally these are rarely installed by contractors. Some local regulations require an electrician to install the wiring for a pressure system, but in other places the installer can do that himself.
Septic System Maintenance Costs
Maintenance for a septic system needs to be done on a regular basis, so the cost of maintenance should be taken into account when you get a new septic tank. For a new drain field or mound-style septic system, annual maintenance charges range from $30 to $750. The pumping cost for standard gravity-fed tanks costs somewhere around $75 to $300 for every pumping, which is required once every 1-3 years. Usually, different septic contractors charge different rates, so make sure you shop around to find the best prices for what you need.
Go to my website to learn more about septic tank prices or maybe even septic tank risers. While you are there, make sure you download my free report discussing the top septic tank treatments.
There are multiple costs associated with a Septic System. I'll start with an explanation of the costs and give the actual estimates at the bottom:
Explanation of Septic Costs:
Cost to Pump Out the Septic Tank: Homeowners should have a licensed septic contractor pump out their septic tank every 3 to 5 years. If the tank is never pumped, then grease and other particles will flow into the leach field and clog the distribution pipes and the surrounding soil. Once that happens, he will need to have a new leach field installed at a cost of $10,000+.
Cost of Septic System Testing with Dye: Septic testing involves adding dye and running water in the house for approximately 30 minutes. Then, the contractor can check for flooding and see where the dye appears. There can be a variety of problems with a septic system, and these problems don't necessarily mean that the whole system must be replaced. This test will help the contractor diagnose the problem.
Cost to Remove Clog in Pipe To Tank: If the homeowner notices slow flushing toilets, he might assume there's a problem with the septic system, so they have a dye test done. If the dye test doesn't cause water and dye to show up in the leach field, then the problem might be a simple clog. A clog will require the assistance of a licensed plumber.
Cost of Complete Visual Inspection: Some septic contractors offer a complete visual inspection of the septic tank with a pumping. Needing this type of inspection is rare because problems with the actual septic tank will usually cause the leach field to fail, and once the leach field fails, you'll start noticing sewage in the yard.
Listing of Estimated Septic Costs:
Cost to Pump Out the Septic Tank: $150 to $250
Cost of Septic System Testing with Dye: $75 to $125
Cost to Remove Clog in Pipes to Tank: $50 to $250 (or more, if it's serious)
Cost of Complete Visual Inspection: $300 to $600
Septic Tank Price Washington