Septic systems are most often found in rural areas of 97010 and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in 97010 means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in 97010?
Do you know people who have had to spend thousands of dollars for the repair or replacement of their septic systems? How about the expense of cleaning up or repairing the house and yard from damage caused by septic backup? Septic system backups create unhealthy and very unpleasant smelling conditions on your property, both inside the house as well as outside the house. If you have a septic system on your property, septic tank pumping should be a very high priority and concern.
All septic tanks need to be pumped out (emptied) and the system inspected periodically. How often should you have your system pumped and inspected? Most septic service companies in Molalla recommend septic tank pumping is done every 3 to 5 years, depending on several variables. Those variables are septic tank size, number of people in the household and the amount of water going into the system.
The size of tank is pretty self-explanatory. If you have a small tank, it follows that it will need emptying more often. But how do you know how large your tank is? Your local septic tank service company can help you locate your tank in the ground and help determine the size of it.
The amount of water going into the tank is determined how many people are living in the house and how much water is used. Toilet flushing probably accounts for the largest percentage of waste water used in most homes. If you live in an older style home and you have the original bathroom fixtures, you will likely have an older style toilet that requires 3 to 5 gallons (or more) of water per flush. Newer toilet designs decrease the water needed per flush to approximately 1.5 or so gallons. There are also inserts that can be placed into the toilet tank that "dam" the water so that less water is needed per flush. These inserts can help you make your older toilet more water efficient.
Having your septic system inspected can save money in costly repairs or replacement. Your local septic service company can inspect the valves, drain field, water inlet and outlets and the general condition of your tank to catch problems before they become a costly repair. Most septic tank pumping and service companies in Molalla will be able to make the repairs or replacements. Your local septic service company can also recommend additives to your tank to help control the sludge and scum that can be part of that expensive septic system failure that you want to avoid.
Although a large percentage of households in America have septic systems, discussions about them are never enjoyable - even for people with the strongest stomachs. Because of the delicate nature of such systems, if anything goes wrong, there is the potential for a huge mess - not only to the household members but also to the environment. Even though this topic may not be a pleasant one, it is essential to address certain issues to ensure that the integrity of a septic system is not compromised.
Homes with a septic tank should know a reputable septic pumping company to provide expert services when needed. Such companies have the necessary equipment to properly perform required suctioning tasks to fulfill the needs of clients. Because keeping septic tanks free and clear of dirt and grime is imperative to the health and well-being of any residents as well as the environment, it is important for everyone involved to have knowledge about household waste management and its requirements.
One of the most important household waste management components is the septic system. The entire system is beneath the ground and usually consists of various pipes, a watertight tank, and a leaching field, each of which is essential for decomposition to occur.
When waste goes into the tank, bacteria transforms it into liquid which becomes the floating layer. Inorganic substances will sink to the bottom and become the sludge layer. Water that enters the tank rests in the middle between the sludge and floating layer. With a properly working system, such water will drain into the gravel, or leaching field, while some may be absorbed into the earth or evaporates. With a failing septic system, unclean water leaks from the tank and causes an adverse effect to the environment; so it is imperative that these systems be inspected on a regular basis.
An experienced septic service provider will teach clients how to keep systems properly functioning, advising of correct maintenance procedures to avoid costly future repairs. If minor problems are ignored, they may cause serious damage down the road, which may have an adverse effect on the environment. Most waste management companies provide services such as tank repair, installation, and pumping. Homeowners can avoid major problems by using their full range of services.
Proper and regular maintenance is essential to waste management so that a system is fully functional and reliable for many years. Pumping sludge from the bottom of the tank allows bacteria to have the right amount of solid waste to decompose, which usually requires the use of a powerful vacuum truck operated by a well-trained technician. They can perform regular check-ups and recommend quality products to treat the tank and explain the correct way to use such chemicals.
Learning and knowing about septic systems encourages septic system owners to take advantage of all offered services of a reputable pumping company. These companies have reliable equipment to perform such tasks and can remove all the dirt and grime that accumulates in a septic tank. This important action will keep such systems properly operating properly, providing many years of reliable service!
In North America, septic systems are still super popular. One reason is that they are much cheaper than being connected to city sewer and another reason is that there are a lot of areas that do not have access to a centralized city sewer system. The key to keeping your septic apparatus humming along with no problems is proper maintenance.
Septic tank cleaning is part of that proper maintenance and many people wonder how much does septic tank pumping actually cost? That is a fair question, but it has a somewhat unfair answer.
A good rule of thumb (I love rules of thumb!) is that it will cost between $125 and $250 (or more) to have a septic system cleaned. Why the price variation? Simple.
Here is another rule of thumb, the more difficult it is for the septic cleaning guy to access your septic system, the more it will cost you to have it pumped. As you may know, most septic tanks are meant to be buried under ground. If you do not have a septic riser installed, then you or the septic tank guy will have to dig a hole down to the septic container lid. A backbreaking job, no doubt, and the contractor will want to be compensated. If there is digging involved you will be looking at closer to $250 for your septic tank pumping cost.
Some people do not even know where their septic tank is; let alone where to find the access lid. Luckily, there are septic system service companies that have special tools used to locate septic containers.
One is a simple plumbing snake, with a not-so-simple radio transceiver attached to the end. The plumbing snake is fed through the house pipes and into your septic container. Then the contractor goes out and uses a radio receiver to determine where the end of the plumbing snake is and voila! There is your septic container.
A more sophisticated tool is ground penetrating radar (GPR), which can find a septic system much more quickly and with a lot less effort.
If either of those tools is required to find your septic apparatus then you can bet that your septic system cleaning cost will be over $250.
The bottom line is that the easier it is for the septic system pumper to find and access your septic container the lower your septic tank pumping cost will be.
Tips to Minimize Septic Tank Pumping Cost
Make sure you know where your septic apparatus is
Install a septic riser (you can do this yourself or you can have the septic system pumper do this for you...it may cost a $100 or more, but you will more than make up for that over the years through reduced pumping costs)
Have your septic tank cleaned every one to three years to avoid unnecessary drain field damage or back-flow into your house (the frequency will depend on the size of your family and how much water you use...the larger the family, the more water used, the more frequently your septic system will have to be pumped)
Regular septic tank inspections done by a professional plumber can help avert a major disaster caused by a septic system failure. Unfortunately, these are more common than you would think. Because the septic system runs underground, most homeowners tend to ignore it. However, failure to carry out regular inspections of the sewer system can be a health hazard and can also result in destruction of the surrounding property.
Before buying a new home, it is crucial to find out as much as you can about the system. Find out how old the system is and whether or not is has been regularly maintained. Better still, get an inspection done so that you do not start having problems as soon as you buy it and shift in.
What Causes Failure Of The Septic System?
There are several different factors that may cause the septic system to fail. Some of the more common reasons include:
• The septic tank is too small
• The diameter of the drainage pipes are too small
• The drainfield is not large enough or it may not leveled correctly
• The soils in which the system is installed is unsuitable
• Tree roots have entered into the pipes and are causing a blockage
• Faulty surface drainage
The problem is, more often than not, by the time the homeowner realizes there is a problem the damage done would already be quite extensive. To make matters worse, without the proper knowledge and equipment it is almost impossible to determine the cause of the problem. Leaving it unattended or trying to contain the damage by trial and error will only make matters worse. The only way to prevent extensive damage is by calling in a professional to try and resolve the issue.
How Septic Tank Inspection and Maintenance Is Done
When you call a professional plumber to inspect the septic tank and carry out the necessary maintenance, they will come with all of the latest tools.
First they will test for a blockage or seepage by using a sewer camera or by the fluorescent dye method. After determining the exact cause of the problem, they will then use the correct tool to correct it. A sewer snake is usually used to clear a stubborn blockage if that is what is causing the problems. A sewer snake, also called an electric eel, is a long, slender and flexible pipe that is sent into the drain pipe. Though flexible and slender, the pipe is tough enough to dislodge the clog. If the blockage is caused by tree roots that have invaded the pipe, these are usually cut by using a specially designed device called a drain rooter.
Septic tanks help dispose of the dirty water from the house and purify it. However, for a septic tank to function efficiently, it must be maintained properly so that you do not have to suffer from clogged drains and a leaking plumbing system. Septic tank risers will help you have easier access to the area so that you can keep a check on it when necessary and also locate it easily.
Different Types of Septic Tank Risers
A septic tank riser will vary in size depending on the size of your tank. You will usually need one that is between six inches and twelve inches long with a diameter of twelve to twenty-four inches. If the container is buried deep underground, these devices may have to be stacked on top of each other.
There are three kinds of risers that you can purchase depending on the material that is used to make them.
The first and most basic option available is a concrete riser. This is usually quite heavy and it can be a little difficult to install. Concrete also suffer a lot of wear and tear so you may need to replace it often. This means that even though it is the cheapest option in the market, in the long run you may end up spending more because you will have to replace it more often than the others.
The other two options are PVC and Polyethylene risers. These are a lot more durable and they look better than the concrete ones. They are also lighter so it is easier to get them fitted to the tank. During their installation, gaskets are used in order to seal them. This makes the lids fit more securely and it prevents outside matter from getting inside the area. PVC and Polyethylene is also non-reactive to other chemicals so they don't get damaged easily and you will have to replace them very rarely.
Why Get a Riser?
A septic tank riser has two basic functions. First, it helps you locate the area. Even though this may not seem important, locating the container can often get difficult, especially when it is buried deep underground. In fact, building regulations now make it compulsory to install these accessories for all septic tanks that are located in the premises of the building. The other important function is to help you lift the lid of the container. Since these tanks are fastened securely and held down by steel screws, it can get very difficult to lift the lift without a riser. In fact, some risers are even made with structural ribs so that frost does not build on them and they can be used easily during all weather conditions.
Do you know where your septic tank is? Okay, so you can point to an area on your property and say "yeah, it's over there" with a hint of un-sureness. The next question is probably more important then the one just asked. Do you know where the lid to your septic tank is? Does that have you scratching your head?
Septic tanks by their very nature are buried, sometimes 3 feet or deeper underground. Out of sight out of mind so to speak. But that's not necessarily a good thing. There will come a time when your septic system begins to exhibit problems and needs some maintenance/repairs and the tank needs to be pumped out. Having a general idea as to the location of your tank can make getting this simple task done much more difficult.
There are two ways to deal with this problem and one way to make sure that in the future it won't be an issue. First let's look at finding the lid to the septic tank if you don't know where it is. You can either dig for it yourself or have the septic pumping service do it. Doing it your self can be time consuming and not a lot of fun. Having the pumping service do it can be costly.
Generally it is done in this fashion. You or someone you hire has to dig down until they find the top of the septic tank. That is usually the easy part of the process. Once you find the top of the tank you then need to find the lid. This can involve digging concentric circles outward from your initial hole until you find the lid. Once you find the lid now is the time to fix the problem; install a riser.
A septic tank riser is essentially a large tube that extends from the lid of the tank up to the surface of the ground. Once installed it will provide quick access to the septic tank that's easy to find any time there is a problem or it needs to be pumped out.
There are three basic types of risers to choose from; concrete, PVC, and polyethylene.
While concrete risers are generally cheaper it isn't the best choice. A concrete riser is heavy and may need heavy equipment to lift and install it. It is also more apt to leak then the other materials and may have rust problems if rebar is used to strengthen the cement.
PVC and polyethylene risers are lightweight and easy to install. They are resistant to corrosion and of course will not rust. They also incorporate a gasket seal to keep water from entering and prevent sewer gases from escaping from a leaky lid. The increased cost of these two types of risers is well worth it. They are virtually maintenance free and will easily last for the life of the whole septic system.
Every septic tank needs a riser and in many places they are now a code requirement. If you don't have one it might be worth having one installed before something goes wrong with your septic system. Quick access to the tank is one of the first steps to diagnosing any problems.
Septic Tank Inspection Oregon