Septic systems are most often found in rural areas of 97004 and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in 97004 means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in 97004?
Do you know people who have had to spend thousands of dollars for the repair or replacement of their septic systems? How about the expense of cleaning up or repairing the house and yard from damage caused by septic backup? Septic system backups create unhealthy and very unpleasant smelling conditions on your property, both inside the house as well as outside the house. If you have a septic system on your property, septic tank pumping should be a very high priority and concern.
All septic tanks need to be pumped out (emptied) and the system inspected periodically. How often should you have your system pumped and inspected? Most septic service companies in Molalla recommend septic tank pumping is done every 3 to 5 years, depending on several variables. Those variables are septic tank size, number of people in the household and the amount of water going into the system.
The size of tank is pretty self-explanatory. If you have a small tank, it follows that it will need emptying more often. But how do you know how large your tank is? Your local septic tank service company can help you locate your tank in the ground and help determine the size of it.
The amount of water going into the tank is determined how many people are living in the house and how much water is used. Toilet flushing probably accounts for the largest percentage of waste water used in most homes. If you live in an older style home and you have the original bathroom fixtures, you will likely have an older style toilet that requires 3 to 5 gallons (or more) of water per flush. Newer toilet designs decrease the water needed per flush to approximately 1.5 or so gallons. There are also inserts that can be placed into the toilet tank that "dam" the water so that less water is needed per flush. These inserts can help you make your older toilet more water efficient.
Having your septic system inspected can save money in costly repairs or replacement. Your local septic service company can inspect the valves, drain field, water inlet and outlets and the general condition of your tank to catch problems before they become a costly repair. Most septic tank pumping and service companies in Molalla will be able to make the repairs or replacements. Your local septic service company can also recommend additives to your tank to help control the sludge and scum that can be part of that expensive septic system failure that you want to avoid.
Although a large percentage of households in America have septic systems, discussions about them are never enjoyable - even for people with the strongest stomachs. Because of the delicate nature of such systems, if anything goes wrong, there is the potential for a huge mess - not only to the household members but also to the environment. Even though this topic may not be a pleasant one, it is essential to address certain issues to ensure that the integrity of a septic system is not compromised.
Homes with a septic tank should know a reputable septic pumping company to provide expert services when needed. Such companies have the necessary equipment to properly perform required suctioning tasks to fulfill the needs of clients. Because keeping septic tanks free and clear of dirt and grime is imperative to the health and well-being of any residents as well as the environment, it is important for everyone involved to have knowledge about household waste management and its requirements.
One of the most important household waste management components is the septic system. The entire system is beneath the ground and usually consists of various pipes, a watertight tank, and a leaching field, each of which is essential for decomposition to occur.
When waste goes into the tank, bacteria transforms it into liquid which becomes the floating layer. Inorganic substances will sink to the bottom and become the sludge layer. Water that enters the tank rests in the middle between the sludge and floating layer. With a properly working system, such water will drain into the gravel, or leaching field, while some may be absorbed into the earth or evaporates. With a failing septic system, unclean water leaks from the tank and causes an adverse effect to the environment; so it is imperative that these systems be inspected on a regular basis.
An experienced septic service provider will teach clients how to keep systems properly functioning, advising of correct maintenance procedures to avoid costly future repairs. If minor problems are ignored, they may cause serious damage down the road, which may have an adverse effect on the environment. Most waste management companies provide services such as tank repair, installation, and pumping. Homeowners can avoid major problems by using their full range of services.
Proper and regular maintenance is essential to waste management so that a system is fully functional and reliable for many years. Pumping sludge from the bottom of the tank allows bacteria to have the right amount of solid waste to decompose, which usually requires the use of a powerful vacuum truck operated by a well-trained technician. They can perform regular check-ups and recommend quality products to treat the tank and explain the correct way to use such chemicals.
Learning and knowing about septic systems encourages septic system owners to take advantage of all offered services of a reputable pumping company. These companies have reliable equipment to perform such tasks and can remove all the dirt and grime that accumulates in a septic tank. This important action will keep such systems properly operating properly, providing many years of reliable service!
In North America, septic systems are still super popular. One reason is that they are much cheaper than being connected to city sewer and another reason is that there are a lot of areas that do not have access to a centralized city sewer system. The key to keeping your septic apparatus humming along with no problems is proper maintenance.
Septic tank cleaning is part of that proper maintenance and many people wonder how much does septic tank pumping actually cost? That is a fair question, but it has a somewhat unfair answer.
A good rule of thumb (I love rules of thumb!) is that it will cost between $125 and $250 (or more) to have a septic system cleaned. Why the price variation? Simple.
Here is another rule of thumb, the more difficult it is for the septic cleaning guy to access your septic system, the more it will cost you to have it pumped. As you may know, most septic tanks are meant to be buried under ground. If you do not have a septic riser installed, then you or the septic tank guy will have to dig a hole down to the septic container lid. A backbreaking job, no doubt, and the contractor will want to be compensated. If there is digging involved you will be looking at closer to $250 for your septic tank pumping cost.
Some people do not even know where their septic tank is; let alone where to find the access lid. Luckily, there are septic system service companies that have special tools used to locate septic containers.
One is a simple plumbing snake, with a not-so-simple radio transceiver attached to the end. The plumbing snake is fed through the house pipes and into your septic container. Then the contractor goes out and uses a radio receiver to determine where the end of the plumbing snake is and voila! There is your septic container.
A more sophisticated tool is ground penetrating radar (GPR), which can find a septic system much more quickly and with a lot less effort.
If either of those tools is required to find your septic apparatus then you can bet that your septic system cleaning cost will be over $250.
The bottom line is that the easier it is for the septic system pumper to find and access your septic container the lower your septic tank pumping cost will be.
Tips to Minimize Septic Tank Pumping Cost
Make sure you know where your septic apparatus is
Install a septic riser (you can do this yourself or you can have the septic system pumper do this for you...it may cost a $100 or more, but you will more than make up for that over the years through reduced pumping costs)
Have your septic tank cleaned every one to three years to avoid unnecessary drain field damage or back-flow into your house (the frequency will depend on the size of your family and how much water you use...the larger the family, the more water used, the more frequently your septic system will have to be pumped)
So you have realized that your septic tank is an important part of your property but how exactly do you maintain it? Much like a car, a little maintenance will go a long way towards the life system. Follow these steps to properly maintain your septic system.
1. Locate Your Tank
While this may seem obvious, finding your septic tank is a little more difficult than what many think. They are buried deep underground and if your house has any age to it there is probably no visible signs as to where your system could be. If you happen to have a basement you can go down and follow your sewer lines out the wall to give you an idea as to where your septic tank might be buried. Otherwise, leave it to the professionals to locate it. They have special tools like an insulated piping they stick deep into the ground to find your tank and all its's components. Once located make sure you mark it in some way for future reference.
2. Uncover the Manhole and Inspection Ports
More than likely the man hole and inspection ports on your septic tank are buried down with the tank itself. This will require some digging at might be wise to replace with elevated access covers or risers for future inspectors to easily locate your system.
3. Check Your Connections
Since you are already going to all this trouble to check your septic tank system it would be wise to go ahead and check all your plumbing as well. This can be easily done by flushing toilets, running water in faucets, or running a load through the washer to make sure all your plumbing connections are working properly and flowing through your tank.
4. Measure the Scum and Sludge Layers
Now we're to the nitty gritty. Let us preface by saying you should NOT do this your self. Allow a trained inspector measure your septic tank system. It can be very dangerous to try and do this without training. Inserting a tool through the inspection port, the inspector will measure your tank and see where your levels of scum and sludge lay. This will also include a visual inspection of these levels.
If the sludge depth is equal to 1/3 the liquid depth your septic tank is in need of a pumping. If the tank is 1/3 full in general it also will need to be pumped. It is highly advised to pump your system when the inspector recommends; like mentioned in previous posts a little work now will greatly increase the life of the tank and save you a lot of time and money.
**WORD OF CAUTION**
As mentioned above, ONLY allow a trained professional inspect your septic tank. This is a tank full of waste; toxic gases created by the natural process in the tank can kill in MINUTES. Merely looking down into the tank can be hazardous to your health.
5. Checking your Septic Tank and It's Drainfield
After checking the scum and sludge layers of the tank the inspector will check for any cracks in the walls and drainfield for any signs of failure. If there are any additional pieces of equipment with your septic tank system, such as a distribution box, drop box, or pump, he will inspect these as well. After a thorough inspection the inspector will give you his recommendation as to what you should do to properly maintain your septic tank.
If you need to pump your septic tank it is very important that you hire a professional licensed contractor. There are many things that could be damaged in the process of pumping your tank, such as the contractor using the inspection port instead of the manhole to pump out the waste. It is recommended to be present at the time the contractor is pumping your tank. Since you are spending all the time and money on getting your tank cleaned, make sure that he pumps it ALL. You do not need to have anything in your septic tank to restart the process inside the tank, nor do you need to scrub or clean the inside of the septic tank.
This is the single most important thing you can do for your system. If it gets too full solids can move to the drainfield causing clogging and a whole "heap" of other problems.
Septic tank is a necessity in every household when there is no available centralized community wastewater treatment especially in the rural areas. Septic is where all the wastewater from the household runs into before it is drained in the environment. Maintaining and taking care of your septic system is not difficult because the modern design of septic tank system functions efficiently. There is however few guidelines you need to follow in order to keep your tank functioning effectively for a long time. Here are some tips to have a trouble-free tank system.
First, you must not allow the rainwater coming from the roof gutters to be diverted at the drainfield. A wet drainfield may no longer absorb and neutralize the effluent liquid from the septic system. The drainfield must be kept dry at most times because that is where the liquid from the septic system goes. You must plan your landscaping by planting grass on top of the drainfield. They will help absorb the excess water when the drainfield becomes soggy. Just make sure that the grasses will not have roots that can reach the lateral pipes to prevent going through the perforations. Additionally, keep trees away from the septic system. The roots of the trees can damage the pipes and the septic tank itself.
Second, you must avoid overloading the septic tank by reducing excessive use of water. Check your faucets of any leaks and repair at once. You can also use aerators on faucets and flow reducer nozzles on bathroom showers to lessen the consumption of water. When doing your laundry reduce the water levels especially for small loads. If you will run the dishwasher wait until it is full. Do not use the dishwasher for small dishes so you'll prevent using water often. Reduce the amount of water needed to flush the toilet by using displacer. You will not only overload the septic tank system but you can also save water.
Third, do not make your toilets as garbage disposal. Avoid flushing disposable diapers, sanitary napkins, paper towels, facial tissue, coffee ground, cigarette butts and filters. They will fill your septic tank system because some of these items are not biodegradable. They will also clog your septic tank system in less time and may pose bigger problems. Wise use of garbage disposal must be practiced. The amount of garbage that is added in the septic system can pile up and make it fail. Choose a top of the line garbage grinder so foods will be ground into tiny particles before it is disposed to the septic system. In this way it will be easier for the septic system to digest it.
Minimize the use of heavy cleaners and products with anti bacterial ingredients because this will kill the beneficial bacteria in the septic tank. The natural bacteria are the one that help in the digestion process of the wastewater in breaking down the solids turning it into liquid effluents. Additionally, avoid pouring hazardous chemicals, varnish, paints, thinner, gasoline, motor oils and other chemicals that may not only ruin the septic system but is also dangerous to the environment.
Septic Tank Inspection Oregon