Septic systems are most often found in rural areas of Manning OR and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in Manning OR means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in Manning OR?
For millions of people living in rural settings septic tank pumping is a fact of life. With the closest municipal sewage hookup miles away a properly maintained and working septic system is vitally important and getting it pumped out at regular intervals is a part of that maintenance. In this article we will look at why getting it pumped out regularly is so important, how it is done and about how much you can expect to pay for this service.
But before we get into all that let's take a quick look at what a septic system is and how it works. In simplest terms a septic system is an underground sewage treatment system for homes that do not have access to municipal sewer services. It typically is comprised of four parts; the waste pipe from the house, the septic tank, the drain field and the soil. All these parts need to in working order but the tank itself is the most important part.
Getting the tank pumped out at regular intervals keeps it working properly and prevents clogs that can cause sewage to back up into the house and create disgusting odors. The primary contributor to septic tank clogs are things that very biodegradable. This includes cooking grease and oils that get dumped down the drain and paper products other then toilet paper; paper towels, sanitary napkins and tampons, cigarette butts and cotton balls will all eventually degrade but they tend to get stuck in the inner working of the tank and create clogs that worsen over time.
Another reason to get a septic tank pumped regularly is to check it for damage that can compromise its ability to work in an efficient manner. Once it's pumped out it can be visually inspected for cracks and other damage. If any damage is detected it needs to be repaired to prevent future problems.
The pumping process itself is pretty straight forward. A large truck, sometimes referred to as a "Honey Wagon", with a big tank, suction pump, and a large hoses will come to the property and park in the general vicinity of the septic tank. The operator will remove the manhole cover from the tank, lower the suction hoses into it and fire up the pumps, sucking the accumulated waste into the holding tank on the truck.
A good pumping service will also provide a thorough inspection of the septic tank once it is pumped clean. They will inspect the tank, valves and inlet and outlet ports for damage such as cracks or clogs. They will also inspect the ground around the tank for signs of leaks as well. Any problems should be brought to the homeowner so that they can be dealt with to ensure the proper operation of the entire septic system.
The cost to get a septic tank pumped out varies and will depend on where you live along with a few other factors. Normally it will cost between $125 to $250 or more. The easier the job the less it will cost but there are some circumstances that can cause the price to increase.
The first problem many homeowners run into is knowing exactly where there septic tank is buried. This is particularly true for people who have purchased a home with an existing system. If it is buried and its location isn't readily apparent then your septic pumping service can use a plumbing snake with a radio emitter attached to the end. The snake is fed through one of the cleanouts in the house and out into the tank. A radio receiver is then used to find the end of the snake which gives the location of the tank.
Another problem is a lack of a septic riser over the lid covering the opening into the tank. If the pumping contractor has to dig down to find the lid this can add to the cost of the service. This is also the perfect opportunity to install a riser to avoid this issue for future pump outs.
The thing to remember when it comes the cost of pumping a septic tank out; The easier it is to for the pumper truck driver to find and access the tank the lower the overall cost will be. It can be well worth it to address any of these issues the first time you get your tank pumped out as it will keep costs down in the future.
Septic tank pumping is the most important part of maintaining a septic system. A clogged or overfull tank is the primary cause of many septic system problems that can be prevented through regularly scheduled visits by the "Honey Wagon".
To understand what is involved in septic tank pumping, it is first important to understand what a septic system is, what it does and how it works. A septic system is, very simply, an underground treatment system for household sewage. A typical septic system consists of 4 components: the pipe from the house, the septic tank, a drain field and the soil. Damage or malfunction of any of these components can cause the system to fail which can result in soil and drinking water contamination and costly repairs or replacements by the homeowner.
How it works
A very basic explanation of how the system works begins with waste water leaving the house through the plumbing network inside the house to the pipe leading to the septic tank. The tank is buried underground and is usually constructed in a water tight manner of concrete, fiberglass or polyethylene. It is intended to hold the waste water long enough to allow the solids to settle to the bottom (to form sludge) and the oils to float to the top (to form scum). Some of the solid waste decomposes as well. There are compartments and a "t" shaped outlet from the septic tank that prevents the sludge and scum from leaving the tank to travel to the drain fields. Once the liquid enters the drain field, it is filtered through the several layers of soil for the final treatment by removal of harmful bacteria, viruses and nutrients.
Septic tank pumping is required periodically to remove the sludge and scum from the tank. If the sludge and scum is allowed to build up in the tank, it can clog the drainage from the septic tank and the drain field. Your local septic service company in Molalla can provide periodic inspections as well as pumping and cleaning of your tank to keep everything working as it was designed.
The pumping process
The process of septic tank pumping involves the use of a large tank truck with suction pumps and hoses. The hoses are inserted into the manhole opening at the ground level to remove the scum and sludge accumulation. The sludge and scum are sucked into the tank on the truck and it is later disposed of in an approved manner and place. The septic service companies in Molalla will inspect the tank, valves and the ground around the system to assess for leaks or clogged areas. Areas needing attention will be brought to the attention of the homeowner and an appropriate resolution suggested.
Since septic tanks may get blocked with waste products over a period of time, it is always better to get them serviced on a regular basis. Septic tank pumping is necessary at times to enhance the lifespan of these systems and also to prevent solid waste from accumulating enough to reach the surface area of the tank. However, it is very important to know the exact time when your septic system needs to be pumped.
According to most experts from some of the cities in the US, like Lawrenceville and Monroe, it is better not to wait till your cesspit is full in order to clean it. Some important points to remember in order to know the exact time for septic tank pumping are:
1. Size of the tank: It is very important to know the exact size of your cesspit in order to know the ideal time to clean it. In order to know when your cesspit needs pumping, you may contact the local health department with the size of it and also the total number of people residing in your home. They would be able to tell you how often your cesspit needs cleaning.
2. Do not wait for any symptoms: According to most experts from some of the major cities in the US, like Duluth and Lawrenceville, it is best not to wait for any signs that would tell you when to opt for septic tank pumping. Normally when these systems work, the waste settles at the bottom and the residue water passes on through the drain field. Once this waste accumulates a lot, it would tend to push its way into the drain field. This would in turn prevent the smooth passage of water. It is always better to opt for septic tank pumping before this happens.
3. Check visually: Most of the cesspits have easy access for you to look inside. Check visually on a regular basis to see that the waste does not accumulate too much. It is good to remember that solid waste should not take up more than 30% of the total area.
Septic systems require regular inspection and repair for proper functioning. The factors which influence the amount of work required in the maintenance are the size of the tank, the extent of its use by the household and the amount of water used in it. These factors influence how frequently the inspections are needed, but it must be kept in mind that even the best maintained septic systems require regular inspection.
The septic tank inspector is usually a qualified private contractor or a health professional with the local health administration. You can get in contact in one through your local health administration or the municipality. The health department will give you a list of the septic system inspectors who work locally. Most waste experts will require a fee for the job.
Locating the Tank
If you have purchased a new house, or have forgotten where the septic tank is, the first job is to locate the septic tank. Septic system inspectors take a fee for this job - so to save money and time you better find it yourself before the inspector comes.
If you are unable to do it yourself, the waste inspector has a number of methods to find a tank.
Sludge Judge and Tank Inspection
The waste expert inspects the condition and status of the solid waste in your septic system using a device called a Sludge Judge. It is a long pipe that is hollowed out to allow waste to enter it from the bottom. When inserted in the septic system waste, it takes a core sample of the solid waste. The inspector then visually inspects core sample to get an idea of the amount of solid and sludge contained in the tank and how decomposed they are. That then helps him decide whether to pump the tank or not.
The inspector also checks that the tank has remained watertight. He also checks the various components and parts of the system, along with the construction of the tank itself. Septic tank inspections are well worth the money if they help you find a problem early, before it becomes costly.
No one ever thinks about what happens to the waste and water once they have flushed the toilet, that is just a fact of life. For those of us whose homes are on urban water systems, we never will have to think about it. But, for those of us who own homes hooked up to septic systems, it is another maintenance issue that simply cannot be ignored. No matter how new or how old your home is, you need to have a regularly scheduled septic tank inspection and replacement costs may be avoided by spotting issues before they become emergencies.
How a Septic System Works
Most septic systems will include large holding tanks for storage, usually made out of plastic, but older ones may be steel or concrete. These tanks hold all of the household waste, especially the water and waste released when you flush the toilet. At some point the tank will be filled to its maximum level, and will need to have the waste disposed of in some fashion. This is usually done in one of three ways: by being pumped out, having bacteria or chemicals added that will break down and destroy the waste, or by allowing it to be drained into the soil through a leech field.
Like all hard working systems, eventually time will run its course, and maintenance will need to be done. Because septic systems are usually buried underground, it can be hard to tell when it is time for regular maintenance, and that is the main reason why regularly scheduled septic tank inspection and replacement assessments are so important. There can be a lot involved with doing even the basic maintenance on such a system, and being able to avoid major problems or even potential problems will insure that the cost of doing so will not skyrocket unnecessarily.
How Does an Inspection Work? How Often Should It Be Done?
Even if your particular septic system uses a leech field, or has decomposition additives used to break down the waste, it still should be pumped out on a regular basis, so that the service technicians can have a chance to inspect it for maintenance issues. Small tanks will require this more often than larger tanks, of course, and even if your system has water conservation measures in place, it still should be pumped out and inspected at least once every three to five years.
A good and thorough inspection should involve not only a visual check of the tank, connectors and drainage points, as well as the leech field, but the tank should be opened as often as possible, and the inside inspected. There are tests that field service agents can perform to test the function of the tank itself, like adding dye to the water to test for leaks. Any baffles or lids should also be checked for signs of wear and tear, as well as any connections and connecting pipes that the technician can reach readily.
Signs that Replacement is Needed
If you are in the market to purchase a home that is connected to a septic tank system, you should have a proper inspection done right away. Not all prior owners reveal the true facts about the system, or may not even know that it is close to being repaired or replaced. The more you know, the more prepared you will be for potential problems down the road. If the tank in the installed system is steel or concrete, you may want to negotiate getting it replaced right away.
Steel tanks rust, and may develop breaks and leaks that will eventually cause the leech field to be flooded. Concrete tanks break down over time, and if the area where the tank is buried is near the home, chances are something has been driven over it at some point. Even the smallest car has the potential to break down a concrete tank by exerting added pressure at a weak point. If water has reached the surface of the leech field, the leaks are extensive, and it is far past the point where any septic tank inspection and replacement check will help.
Regular septic tank inspections done by a professional plumber can help avert a major disaster caused by a septic system failure. Unfortunately, these are more common than you would think. Because the septic system runs underground, most homeowners tend to ignore it. However, failure to carry out regular inspections of the sewer system can be a health hazard and can also result in destruction of the surrounding property.
Before buying a new home, it is crucial to find out as much as you can about the system. Find out how old the system is and whether or not is has been regularly maintained. Better still, get an inspection done so that you do not start having problems as soon as you buy it and shift in.
What Causes Failure Of The Septic System?
There are several different factors that may cause the septic system to fail. Some of the more common reasons include:
• The septic tank is too small
• The diameter of the drainage pipes are too small
• The drainfield is not large enough or it may not leveled correctly
• The soils in which the system is installed is unsuitable
• Tree roots have entered into the pipes and are causing a blockage
• Faulty surface drainage
The problem is, more often than not, by the time the homeowner realizes there is a problem the damage done would already be quite extensive. To make matters worse, without the proper knowledge and equipment it is almost impossible to determine the cause of the problem. Leaving it unattended or trying to contain the damage by trial and error will only make matters worse. The only way to prevent extensive damage is by calling in a professional to try and resolve the issue.
How Septic Tank Inspection and Maintenance Is Done
When you call a professional plumber to inspect the septic tank and carry out the necessary maintenance, they will come with all of the latest tools.
First they will test for a blockage or seepage by using a sewer camera or by the fluorescent dye method. After determining the exact cause of the problem, they will then use the correct tool to correct it. A sewer snake is usually used to clear a stubborn blockage if that is what is causing the problems. A sewer snake, also called an electric eel, is a long, slender and flexible pipe that is sent into the drain pipe. Though flexible and slender, the pipe is tough enough to dislodge the clog. If the blockage is caused by tree roots that have invaded the pipe, these are usually cut by using a specially designed device called a drain rooter.
Septic Tank Inspection Oregon