Septic systems are most often found in rural areas of 97266 and will consist of a series of pipes connecting it to the home, a septic tank, a filtering system to separate the solid waste from the liquid and connecting pipes that drain off the liquid waste into the yard, in a designated area called the drain field. These systems are often inspected before septic installation and tested afterwards, to make sure that it is operating properly.
Ownership of a septic tank system in 97266 means that everyone understands the importance of having regular septic tank inspection and septic pumping to catch potential problems before they happen. All too often, nothing is done until the worst happens, like the tank developing a leak, or it backs up into an area away from the drain field. Two easy ways to avoid this from happening include monitoring what goes into it as waste and remembering its physical location to avoid accidents.
When there is a septic system installation, the area where the septic tank is placed should be noted so that no accidental driving or parking of a heavy vehicle can occur. While most tanks are buried deep enough to avoid this, as a general principle it should be avoided to prevent damage to the tank in the future.
What are the health department regulations for a Septic Tank in 97266?
Most of us pay ample value to the interiors of our homes, but often, we intentionally or unintentionally choose to avoid things that need attention like proper septic tank installation and maintenance. No matter where you have your home, having the right kind of septic tank installed and ensuring its maintenance is one aspect that you just cannot ignore. Before going in the details of how to choose a company, it is essential to understand the need to invest in such maintenance costs.
Avoid health hazards and damage to environment: In the case of septic tank failure, the local environment can be largely affected. This can lead to further health related hazards for your family and those families living nearby. This is a condition can often be immensely dangerous, and the effects can be there even after a long time.
Avoid the repair costs: Most people don't realise the simple fact that septic tank service is easy on the pocket rather than repairs. In fact, repairs can run in thousands of dollars, and in an unfortunate event where reinstallation is required, you are in for big troubles. Rather than investing so much in a single payment, hiring the services of a professional for cleaning, pumping and maintenance is a safer and better option any day.
Avoid property damage: Apart from the damage mentioned above, you can also face damage to the property values. If you are really concerned about your home and want to fetch a good resale value at a later stage, maintenance and upkeep of septic tank is something you just cannot ignore. Property evaluators may not consider your home to be worth of what you ask if there is any damage related to septic tank.
The main question lies in how to select the right company for septic tank cleaning, pumping and maintenance. It is obvious that a local company must be selected, but make sure that you take a look at the traits given below before choosing one.
Look for a construction company: Rather than looking for company that can offer maintenance, it is essential that you look for a company that is well versed with installation, repairs and other tasks. This will not only bring you the best expertise, but at the same time, you can get emergency services when required.
Look for costs: The costs of annual septic tank maintenance contracts can vary from one company to another, and this is also large dependent on the tank type you have. While looking for hiring a company, ask for quote and compare the same with others.
Look for experience: Always choose a licensed company over a company that is still looking for it. It is important that your company has the right experience to handle repairs, pumping, cleaning and maintenance, and when required, they must be available for service. A reputed company should good at commercial and residential sites alike.
Check online on a few company websites for details on septic tank maintenance.
Where your waste goes after it gets flushed down the toilet isn't something that many of us think about very often, nor should it be. Thanks to technological advances in the last century, plumbing and public sanitation has become much more convenient, hygienic and precise. The vast majority of those of us who live in metropolitan areas have our home sewer lines tapped into the city sewer mains, which means that our waste travels to a public treatment plant to be processed. For homes and businesses that cannot tap into public sewer lines, however, using a septic tank is an option that provides similar results in a different manner.
They are large holding tanks for sewage, almost always located below ground. They are usually constructed of plastic, and are often able to contain many weeks worth of waste. A septic tank can generally allow for the permanent disposal of waste in one of three ways: by being pumped out on a regular basis, by having bacteria or chemicals applied that eats away the waste naturally, or be allowing the waste to be dispersed naturally into the ground through a leech field. In all of these cases, septic tanks usually require less maintenance than you would think after the initial installation is complete.
A tank is generally called for in a couple of different scenarios. The first and most common is in more rural areas that do not have public city sewer systems available to tap into. The tax dollars that we pay as residents of a city go partially toward providing sanitary services, one of which is maintaining a public sewage treatment plant and sewer system. If, however, your home or business is located too far away from existing city sewer lines, it becomes necessary to dispose of your own waste by installing a septic tank system. Generally, permanent tanks are relatively affordable, can be installed in a few days, and are reliable.
Another scenario where septic tanks might be necessary is on temporary, extensive construction projects that will require many laborers over a longer period of time. In this case, portable toilets might be too temporary and inadequate, but actually building a sewer main to attach to the city sewers might be too expensive and time consuming. In this case, a small tank system is a more intelligent solution that can be used temporarily and then removed when the construction project is complete.
If you think that you might need to have a tank system installed at a home, business or constructions site, make sure that you research local contractors to see who offers the best prices and service. Thanks to modern technology, you shouldn't notice any discernible difference between being attached to a public sewer system and using a septic tank.
For those non-city folks that rely on a septic system instead of a city sewer, having a failed septic system is a major headache. It is amazing to hear the horror stories, as well as, the vast amount of mis-information being circulated about septic tanks, leaching systems, septic system repair costs, etc.
With over 30 years of experience in the design engineering of subsurface sewage disposal systems, commonly called "Septic Systems", I've prepared this easy to follow 12 step outline as a guide in replacing a Septic System. There is one very important pre-qualification before you start, you need to retain a qualified professional civil engineer or registered sanitarian. I have to stress the word "qualified", unless you want to enjoy being the leading role in the next release of "Horror Stories from the Leaching Field". Take the time to do a little homework, such as going to your local Health Board office and asking what civil engineers are designing septic systems in your Town and whose design plans are typically approved without having to be sent back for corrections and revisions. Once you get a few names, do a little research on the web, Better Business Bureau, etc. Then you should contact these civil engineers and talk with them about your problem septic system and ask for a written proposal that will outline the tasks and costs. Just like you wouldn't eat a rotten piece of fruit, if you don't have a good feeling about a particular civil engineer, then do not hire him!
Now you are ready to go forward with the 12 steps.
1. A test application is submitted to the local Health office (some States, like Rhode Island, control the testing, etc. so the application would have to go to a State agency.)
2. You hire an excavation contractor to dig the test holes. If you do not know a local excavating contractor, then your engineer should provide you with a few contact names. (FYI - by hiring a contractor for the test holes, you are not making a commitment or obligation to hire him to install the replacement septic system.) This excavation contractor will need to follow local / state safety regulations (such as obtaining a "dig-safe" number and having the underground electric, telephone, CATV, gas, etc. located before the test holes are dug.
3. The engineer coordinates with the Health Agent, excavating contractor and you (the client) to set the testing date.
4. The engineer performs the official deep hole soil evaluation and associated "perc" percolation testing. Soil samples may have to be obtained and taken to a lab for further testing. The engineer prepares the official forms (soil logs) and submits a copy to the local health office and to you.
5. The engineer performs a limited existing conditions topographic "topo" survey of your property where the replacement septic system is proposed. (FYI - Unless you have a small lot or do not know where your lot lines and/or lot corners are located, you typically would not need to have your property line surveyed.)
6. The engineer uses the results of the soil evaluation, perc. testing, topo survey in combination with the current and anticipated building use (number of bedrooms, garbage grinder, etc.) and State / Local Sanitary Codes to design a replacement septic system for your property.
7. The formal design plans (with the original seal and signature of the professional civil engineer) and construction permit application are submitted to the local Health Agency for review and approval.
8. The engineer provides you with additional copies of the design plans for you to submit to licensed contractors to obtain a price quote / bid.
9. Once you have selected a contractor, he coordinates with the local Health Agency (to obtain the permit) and the engineer, prior to starting the work.
10. The Health Agent visits the construction site as the work progresses to observe and confirm Code compliance.
11. The engineer, in most States, must visit the construction site to observe the critical construction stages, make measurements and prepare a formal plan showing the completed "as-built" septic system. The engineer submits a copy of this plan to you and the local Health Agency along with a signed compliance statement. Some States also require the contractor to sign and submit a compliance statement.
12. The local Health Agency reviews the "as-built" plan, etc. and issues a "Certificate of Compliance" which signifies that the replacement septic system as installed is in compliance with the State and Local Sanitary Code.
One other item, if you have wetlands on or near your property and the anticipated work will be within 100 ft. of these wetlands, then additional permitting will be necessary before you can have the replacement septic system installed.
New septic system costs can be through the roof if you live in the wrong part of the country and unfortunately, there isn't much you can do about it. Unless you can do some of the work yourself or you have friends in the septic industry.
Septic systems do not come with price tags attached to them. So it becomes difficult to get a quote on the price of a new septic system, unless you ask the right questions and the right person to ask them to. Here we tell you how you should do that research, not only for a new septic system, but to also know of the costs of maintaining once it gets installed.
Estimating the Price of a New Septic System
The most important factors that make a difference in the price of a septic processing system are the construction material, the area where you live, the quality that you want, and the company that will install the system for you
The single biggest factor is the region or the area of your residence or installation. The prices range from $3,000 to $15,000.
Another important factor is the material used in construction. High-density polyethylene tanks are costlier than concrete tanks; they last longer too. Aerobic systems are even more costly.
To find the cost of permits that you need to build a septic processing system, you should call up the local Town Hall. To find the new septic tank costs in your neighborhood, ask your friends and neighbors about the cost of their systems. The local Realtors know a lot of the prices and the companies that are active in the area too.
Maintenance Costs of a Septic System
Your average system costs around $30-$750 to maintain. The standard gravity-fed systems need to be repaired and maintained once every 1-3 years, at a price of about $75-$300. Septic processing systems with sand and peat filters and the ones with wetlands construction cost around $50 to $1,700 per inspection and repair.
The average age of a septic system is about 20-40 years. If you take better care of your systems, doing regular inspection and maintenance, you will make them last longer. The difference can be decades. It's a worthwhile effort
Septic tank prices depend on various factors and it is not an easy task to make an accurate estimate of the price yourself. Licensed septic system installers are your best bet to make an accurate assessment of the price of the septic tank design you have in mind. But before you decide on the septic system you want, you have to first research it yourself. Here we tell you about the prices of septic tanks and how to find the best deals.
Septic System Prices for Various Components
Standard gravity-fed septic systems constructed at ground level for a three bedroom house cost around $1,500 to $4,000. Also, plastic vaults, thought smaller in size, cost more than the gravel ones.
Extra bedroom would require you to spend more because of the added capacity required of the tank and the system as a whole. Fine and silty soil also requires a larger drain field, which translates to higher costs. Good quality drain gravel is around $9 - $12 per ton, if it is not too far from the house. Drain field vaults are priced at around $25 to $40. Concrete tanks 1000 galloon in size cost around $500-$700 and that usually comes with free delivery within 50 miles of the contractor. 1250 gallon tanks cost about $600-$800. You should also know about the local laws regarding minimum tank size allowed for your house. Components like septic tanks, drain gravel, vaults and pipes do not have much variation. However, they can vary from state to state. So if you live near state lines, inquiry about the prices of those components in your neighboring state and, if they are cheaper, buy them there.
Pressure systems cost around $3,000 to $5,000+, but generally these are rarely installed by contractors. Some local regulations require an electrician to install the wiring for a pressure system, but in other places the installer can do that himself.
Septic System Maintenance Costs
Maintenance for a septic system needs to be done on a regular basis, so the cost of maintenance should be taken into account when you get a new septic tank. For a new drain field or mound-style septic system, annual maintenance charges range from $30 to $750. The pumping cost for standard gravity-fed tanks costs somewhere around $75 to $300 for every pumping, which is required once every 1-3 years. Usually, different septic contractors charge different rates, so make sure you shop around to find the best prices for what you need.
Go to my website to learn more about septic tank prices or maybe even septic tank risers. While you are there, make sure you download my free report discussing the top septic tank treatments.
There are multiple costs associated with a Septic System. I'll start with an explanation of the costs and give the actual estimates at the bottom:
Explanation of Septic Costs:
Cost to Pump Out the Septic Tank: Homeowners should have a licensed septic contractor pump out their septic tank every 3 to 5 years. If the tank is never pumped, then grease and other particles will flow into the leach field and clog the distribution pipes and the surrounding soil. Once that happens, he will need to have a new leach field installed at a cost of $10,000+.
Cost of Septic System Testing with Dye: Septic testing involves adding dye and running water in the house for approximately 30 minutes. Then, the contractor can check for flooding and see where the dye appears. There can be a variety of problems with a septic system, and these problems don't necessarily mean that the whole system must be replaced. This test will help the contractor diagnose the problem.
Cost to Remove Clog in Pipe To Tank: If the homeowner notices slow flushing toilets, he might assume there's a problem with the septic system, so they have a dye test done. If the dye test doesn't cause water and dye to show up in the leach field, then the problem might be a simple clog. A clog will require the assistance of a licensed plumber.
Cost of Complete Visual Inspection: Some septic contractors offer a complete visual inspection of the septic tank with a pumping. Needing this type of inspection is rare because problems with the actual septic tank will usually cause the leach field to fail, and once the leach field fails, you'll start noticing sewage in the yard.
Listing of Estimated Septic Costs:
Cost to Pump Out the Septic Tank: $150 to $250
Cost of Septic System Testing with Dye: $75 to $125
Cost to Remove Clog in Pipes to Tank: $50 to $250 (or more, if it's serious)
Cost of Complete Visual Inspection: $300 to $600
Septic Tank Inspection Oregon